HomeMy WebLinkAbout2021-2026 State HWP
The State Solid and Hazardous
Waste Plan 2021–2026:
Second Draft Update
Moving Washington Beyond
Waste and Toxics
Hazardous Waste and Toxics Reduction Program
Solid Waste Management Program
Washington State Department of Ecology
Olympia, Washington
August 2021, Publication 21-04-040
Publication Information
This document is available on the Department of Ecology’s website at:
https://apps.ecology.wa.gov/publications/SummaryPages/2104040.html.
Contact Information
Hazardous Waste and Toxics Reduction Program
Solid Waste Management Program
P.O. Box 47600
Olympia, WA 98504-7600
Phone: 360-407-6700
Website: Washington State Department of Ecology 1
ADA Accessibility
The Department of Ecology is committed to providing people with disabilities access to
information and services by meeting or exceeding the requirements of the Americans with
Disabilities Act (ADA), Section 504 and 508 of the Rehabilitation Act, and Washington State
Policy #188.
To request an ADA accommodation, contact Ecology by phone at 360-407-6700 or email at
hwtrpubs@ecy.wa.gov. For Washington Relay Service or TTY call 711 or 877-833-6341. Visit
Ecology's website 2 for more information.
1 https://ecology.wa.gov/contact
2 https://ecology.wa.gov/accessibility
Department of Ecology’s Regional Offices
Map of Counties Served
Region Counties served Mailing Address Phone
Southwest
Clallam, Clark, Cowlitz, Grays Harbor,
Jefferson, Mason, Lewis, Pacific, Pierce,
Skamania, Thurston, Wahkiakum
PO Box 47775
Olympia, WA 98504 360-407-6300
Northwest Island, King, Kitsap, San Juan, Skagit,
Snohomish, Whatcom
PO Box 330316
Shoreline, WA 98133 206-594-0000
Central Benton, Chelan, Douglas, Kittitas,
Klickitat, Okanogan, Yakima
1250 W Alder St
Union Gap, WA 98903 509-575-2490
Eastern
Adams, Asotin, Columbia, Ferry, Franklin,
Garfield, Grant, Lincoln, Pend Oreille,
Spokane, Stevens, Walla Walla, Whitman
4601 N Monroe
Spokane, WA 99205 509-329-3400
Headquarters Across Washington PO Box 46700
Olympia, WA 98504 360-407-6000
The State Solid and Hazardous Waste Plan
2021–2026: Second Draft Update
Moving Washington Beyond Waste and Toxics
Hazardous Waste and Toxics Reduction Program
Solid Waste Management Program
Washington State Department of Ecology
Olympia, WA
August 2021| Publication 21-04-040
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 5 August 2021
Table of Contents
Draft Comments .................................................................................................................... 6
Executive Summary ............................................................................................................... 7
Framework and Foundations ................................................................................................. 9
State Solid and Hazardous Waste Plan purpose and vision ....................................................... 9
Sustainable materials management ........................................................................................... 9
State Plan structure .................................................................................................................. 12
Progress on the 2015 State Plan ............................................................................................... 15
Current trends ........................................................................................................................... 18
Environmental justice ............................................................................................................... 24
If the vision is realized…. ........................................................................................................... 26
Plan Goals and Actions ........................................................................................................ 28
Section One: Managing Hazardous Waste and Materials ........................................................ 28
Section Two: Managing Solid Waste and Materials ................................................................. 39
Section Three: Reducing Impacts of Materials and Products ................................................... 57
Section Four: Measuring Progress ............................................................................................ 69
Section Five: Providing Outreach and Information .................................................................. 74
Glossary and Acronyms ....................................................................................................... 79
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 6 August 2021
Draft Comments
This second draft of the State Solid and Hazardous Waste Plan has been published for public
input. Following the public comment period, Ecology will address comments and publish the
final State Plan Update. This second draft is a full draft and includes an introduction and
glossary, as well as the goals and actions that were in the first draft. Ecology expects to publish
the final version of the State Solid and Hazardous Waste Plan later in 2021.
We welcome comments on this second draft received by September 30, 2021. To comment on
this draft:
• Visit https://swm.ecology.commentinput.com/?id=K67fG.
• Leave contact information (optional). Any information you provide on the comment
form or in an attachment may be publicly disclosed and posted on the Internet.
• Insert comments into the comment box or upload a file with your comments attached,
and continue through the form to submit.
Alternatively, you may share comments with us directly by phone or email:
• Janine Bogar, Senior Planner, Solid Waste Management Program
janine.bogar@ecy.wa.gov; 360-407-6654
• Amy Correa, Senior Planner, Hazardous Waste and Toxics Reduction Program
amy.correa@ecy.wa.gov; 360-407-7613
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 7 August 2021
Executive Summary
Chapters 70A.205 3 and 70A.3004 of the Revised Code
of Washington (RCW) require the Department of
Ecology (Ecology) to develop a state solid and
hazardous plan, and update it regularly. Since 2004,
this plan has been referred to as the Beyond Waste
Plan or the State Plan.
The State Plan guides the management of waste and
materials in the state, and aids local governments as
they develop local solid and hazardous waste plans.
The State Plan builds on waste hierarchies adopted in
the solid and hazardous waste laws of the mid-1980s,
which place waste reduction as the highest priority,
followed by recycling, and then safe disposal. The
state’s 30-year vision—to eliminate most wastes and
toxics and use remaining waste as resources—
supports this hierarchy.
“…material recovery and waste
reduction are essential
components to the productive
and sustainable use of materials
across their entire life cycle to
conserve resources, reduce
waste, slow climate change, and
minimize the environmental
impacts of the materials we use.”
Sustainable Materials
Management Program Strategic
Plan,5 U.S. Environmental
Protection Agency, October 2015
The State Plan promotes a sustainable materials management approach. Materials
management looks at the full life cycle of materials from the design and manufacturing phase,
through the use phase, to the end-of-life phase when the material is either disposed or
recycled. This is important because the adverse environmental impacts of extraction,
production, and use can be far greater than those associated with disposal when a material
becomes a waste. According to the Environmental Protection Agency 6 (EPA), a sustainable
materials management approach is essential to conserving our natural resources to meet both
today’s needs and those of future generations.
The State Plan is organized into five sections. Each section contains an introduction that
includes the regulatory framework and goals and actions that support movement towards
eliminating, reducing, or safely managing waste and toxic substances over the next five years.
Goals describe the desired outcomes and are written broadly for all. Actions outline steps to
help get there and focus on what Ecology hopes to do in the next five years, together with our
partners in local governments, non-governmental organizations, and industry. In fact, many
actions require cooperative work with partners in order to succeed.
3 https://app.leg.wa.gov/rcw/default.aspx?cite=70A.205
4 https://app.leg.wa.gov/rcw/default.aspx?cite=70A.300
5 https://www.epa.gov/sites/production/files/2016-03/documents/smm_strategic_plan_october_2015.pdf
6 http://www.epa.gov
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 8 August 2021
Ecology tries to update the State Plan every five years. The COVID-19 pandemic and associated
impacts to Ecology operations from office closures, staff furloughs, and a hiring freeze delayed
this update.
Ecology made at least some degree of progress on 80 percent of the actions in the 2015 plan.
However, many actions in this update are the same or similar to some in the 2015 update, as
they represent ongoing work or require additional effort to fully realize.
Washington state continues to work towards the 2035 vision established in 2004 to “transition
to a society where waste is viewed as inefficient, and where most wastes and toxic substances
have been eliminated.”
When preparing this plan update, Ecology is providing two opportunities for commenting: on a
first partial draft, and on a complete second draft, which is this document.
Visit Ecology’s State Plan webpage 7 for more information on the update process and the
comments received.
7 https://ecology.wa.gov/Regulations-Permits/Plans-policies/Washington-state-waste-plan/About-the-plan
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 9 August 2021
Framework and Foundations
State Solid and Hazardous Waste Plan purpose and vision
Chapter 70A.2058 and Chapter 70A.3009 Revised Code of Washington (RCW) require the
Washington Department of Ecology (Ecology) to develop a state solid and hazardous plan, and
update it regularly. The State Plan guides the management of waste and materials in the state
and aids local governments as they develop local solid and hazardous waste plans.
The State Plan’s 30-year vision—to eliminate most
wastes and toxics and use remaining waste as
resources—supports the waste management
hierarchy established in the solid and hazardous waste
statutes, which identify waste reduction as the highest
priority, followed by recycling, and then safe disposal.
In the original 2004 Beyond Waste State Plan, Ecology
envisioned a better future for waste in Washington, to
be realized by 2035. The year 2035 was chosen
because then-Governor Gary Locke adopted a strategy
to make Washington state sustainable in one
generation, or 30 years. Implementing this vision will
help the state become sustainable.
Vision for moving
Washington beyond
waste and toxics
We can transition to a society
where waste is viewed as
inefficient, and where most
wastes and toxic substances have
been eliminated. This will
contribute to economic, social
and environmental vitality.
Plan update process
The State Plan is updated approximately every five years. The COVID-19 pandemic delayed this
update. Ecology created a first draft, which we circulated for public comment. We used those
comments to create this second draft. Comments on the second draft will be used to create the
final plan update.10
Sustainable materials management
The State Plan promotes a sustainable materials management (SMM) approach, which looks at
the full life cycle of materials. The U.S. Environmental Protection Agency (EPA) defines SMM as,
“An approach to serving human needs by using/reusing resources productively and sustainably
throughout their life cycles, generally minimizing the amount of materials involved and all
8 https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205
9 https://app.leg.wa.gov/RCW/default.aspx?cite=70A.300
10 Comments can be viewed on the state waste plan webpage: https://ecology.wa.gov/Regulations-Permits/Plans-
policies/Washington-state-waste-plan/About-the-plan
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 10 August 2021
associated environmental impacts.”11 This life cycle, as illustrated in the Figure 1,12 includes the
design and production phase, through the use and reuse phase, to the end-of-life phase when
the material is either disposed or recycled. Recycling and use of recovered materials leads back
into the design and production phase. Materials that are extracted from virgin resources are
new inputs into the cycle and those that are disposed at end-of-life exit the cycle.
Figure 1: Materials and Products Life Cycle
Looking at the full life cycle is crucial because the adverse environmental and health impacts of
extraction, production, and use typically greatly exceed those associated with disposal when
the material becomes a waste. By managing materials that become waste through all stages of
their life cycle, we are best able to reduce harmful environmental, health, and climate effects.
EPA adopted a framework for sustainable materials management in 2004. EPA’s 2009
publication “Sustainable Materials Management, The Road Ahead”13 laid the foundation to
address “the movement of materials through the economy and the environment from
extraction to end of life.” Oregon was the first state to use this framework as the basis for their
11 Environmental Protection Agency, “U.S. EPA Sustainable Materials Management Program Strategic Plan, Fiscal
Year 2017–2022,” October 2015, https://www.epa.gov/sites/default/files/2016-
03/documents/smm_strategic_plan_october_2015.pdf, accessed on August 11, 2021.
12 Graphic adapted from Oregon Department of Environmental Quality.
13 https://www.epa.gov/sites/production/files/2015-09/documents/vision2.pdf
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 11 August 2021
state waste management plan in 2010. Since that time other states have adopted this
framework as well.
Resources are declining worldwide while demand
continues to grow. As more people consume more
resources in the form of products and materials, it
causes more pollution, including greenhouse gases
and other toxic releases. This also puts increased
pressure on the communities that extract or
manufacture these resources.
Using resources faster than the planet can renew
them limits the ability of all people to meet their basic
needs now and in the future. Since the industrial
revolution, society has been operating on the
assumption that resources are abundant, readily
available, and cheaply disposed. This is not the case.
The linear use of resources where we extract
materials, use them once, and then throw them away
is not sustainable. Not only will we run out of key
materials, but the throw-away society continues to
pollute our environment with waste and toxics. We
need to use fewer resources, and use them in a
circular model, as illustrated by the Sustainable
Materials Management Cycle in Figure 1.
The SMM framework continues to serve as a useful
approach for advancing Washington state goals for
sustainable energy and a clean environment, healthy
and safe communities, and a prosperous economy.14
It also supports Ecology’s goals to prevent and reduce
toxic threats and pollution, protect and manage our
state’s waters, protect and restore Puget Sound, and
reduce and prepare for climate impacts.15
Table 1 shows how Ecology’s current work fits into the
SMM cycle. Since 2015, Ecology has dedicated more
efforts and resources to addressing the design and
production phase.
“Sustainable materials management
(SMM) is a systemic approach to using
and reusing materials more
productively over their entire life
cycle. It represents a change in how
our society thinks about the use of
natural resources and environmental
protection. By examining how
materials are used throughout their
life cycle, an SMM approach seeks to:
• Use materials in the most
productive way with an
emphasis on using less.
• Reduce toxic chemicals and
environmental impacts
throughout the material life
cycle.
• Assure we have sufficient
resources to meet today’s
needs and those of the future.
How our society uses materials is
fundamental to our economic and
environmental future. Global
competition for finite resources will
intensify as world population and
economies grow. More productive
and less impactful use of materials
helps our society remain economically
competitive, contributes to our
prosperity and protects the
environment in a resource-
constrained future.”
—From EPA SMM Website 16
14 Results Washington: https://results.wa.gov
15 Department of Ecology 2021–2023 Strategic Plan: https://ecology.wa.gov/About-us/How-we-operate/Strategic-
plan
16 Sustainable Materials Management Basics, U.S. Environmental Protection Agency:
https://www.epa.gov/smm/sustainable-materials-management-basics
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 12 August 2021
Table 1: How Ecology’s Work Fits Into the Sustainable Materials Management Cycle
Design and Production Use and Reuse End-of-Life Management
• Compliance with state
consumer product laws
• Food waste prevention
• Advancing green
chemistry
• Chemical action plans
and alternatives
assessments
• Toxics reduction
assistance to
businesses
• Pollution Prevention
Assistance Partnership
and the Product
Replacement Program
• Pollution prevention
planning
• Environmentally
preferred purchasing
• Technical assistance and
information on safe use
of chemicals and toxic
products
• Support re-use networks
• Pollution Prevention
Assistance Partnership
• Plastic Bag Ban
• On-request food service
ware
• Pollution prevention
planning
• Recycling Development
Center
• Contamination Reduction
and Outreach Plans
• Post-consumer recycled
content requirements
• E-Cycle, LightRecycle and
PaintCare extended
producer responsibility
programs
• Solid waste facility
assistance
• Dangerous waste
compliance
• Permitting dangerous waste
facilities
• Corrective action cleanup of
legacy contaminated sites
• Pollution Prevention
Assistance Partnership
• Recycling, organics and
moderate risk waste
technical assistance
State Plan structure
The State Plan is organized into five sections:
• Managing hazardous waste and materials
• Managing solid waste and materials
• Reducing impacts of materials and products
• Measuring progress
• Providing outreach and information
Each section contains an introduction with background information, the regulatory framework
and goals and actions.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 13 August 2021
The State Plan update contains a total of 42 goals with 143 supporting actions. Goals describe
the desired outcome and actions outline steps to help us get there. The goals and actions derive
from stakeholder input as well as staff expertise. They represent a wide spectrum of steps to
move us into a future of less waste and toxics, while working to keep current systems
functioning well.
The goals and actions are written broadly for application to many audiences. Actions highlight
what Ecology hopes to work on the next five years, in coordination with our stakeholders. Many
actions in this update are the same or similar to some in the 2015 update as they represent
ongoing work or require additional effort. Other actions embody new work. Whether ongoing
or new work, implementing actions depends on available resources.
Actions are also intended to provide guidance to other governments, organizations, and the
private sector, and may be carried out by others as well as Ecology. A few can only be
accomplished by entities other than Ecology. Together, the goals and actions represent a
flexible list of options that support movement toward the State Plan’s vision.
Roles for partners
Though the actions are written primarily as work for Ecology, many specify partners necessary
to advancing the work. In fact, most rely on partnerships and assistance from others to
succeed. Progress on the State Plan depends in large part on the engagement and actions of
our partners. Working to reduce and safely manage waste and toxic substances is a group
effort!
Partners include but are not limited to:
• Facility operators.
• Local governments.
• Non-governmental organizations and community groups.
• Other state agencies.
• Pollution prevention planning facilities.
• Product manufacturers and retailers.
• Service providers.
• Waste generators.
• Universities.
Not all partners will engage on all actions. Some actions call for Ecology to work with specific
partners. Partners can lead and innovate or address more routine services and challenges.
Wherever partners are on this continuum, there are many opportunities to help advance the
State Plan’s goals. Overall, any projects that focus on reducing waste and toxics advance the
State Plan’s vision.
Additional information on actions for others will be provided in a forthcoming appendix.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 14 August 2021
Guiding principles and strategies
As Ecology and others work to advance the goals and actions of the State Plan, key principles
and strategies can guide us:
• Focus on preventing wastes in the first place.
• Research issues and policy solutions. Minimize unintended consequences of actions.
• Provide outreach and education in support of topics in the State Plan.
• Create collaborative partnerships and lead by example.
• Work to remove barriers and change behavior with incentives.
• Build on what’s already working; take advantage of momentum and complementary
actions.
• Take account of human and environmental health, environmental justice, economic
viability, and people’s quality of life.
• Collect, analyze and share data.
• Evaluate programs and measure progress.
• Strive for continuous improvement.
Vision and Priorities of the State Plan
We can transition to a society where waste is viewed as inefficient, and where most wastes and
toxic substances have been eliminated. This will contribute to economic, social, and
environmental vitality.
Increase our focus on
manufacturing and
use phases, not just
on end-of-life issues.
Reduce toxic threats
in products and
industrial processes.
Maximize
effectiveness of
recycling and organic
processing systems.
Mitigate climate
change through
waste reduction,
reuse, and recycling.
Priorities
The following priorities will move us closer to the vision and ensure the current system works
well.
Move upstream by increasing focus on manufacturing and use, not just end-of-life issues.
• Gather data on the full life cycle of materials from manufacture, use, and discard.
• Promote environmentally preferred purchasing and independent, third-party certifications
and labels.
• Encourage increased producer responsibility for their products.
• Enable more repair and reuse of materials and products.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 15 August 2021
Reduce toxic threats in products and industrial processes.
• Encourage less toxic products and industrial processes through better design.
• Promote the use of alternatives assessments and green chemistry to find safer substitutes
to toxics in products.
• Increase local partnerships to work on toxic chemical source control.
• Reduce or eliminate the use of the most toxic chemicals where safer alternatives exist.
Address systemic issues with recycling (including organic processing).
• Address contamination in recycling and composting systems in order to ensure clean and
marketable end-products from organics and recyclables.
• Support market creation for recycling, including recycled content.
• Focus on facility compliance, technical assistance, and enforcement.
Mitigate climate change.
• Prevent and reduce waste, including food waste.
• Increase use of processed organics to sequester carbon.
• Leverage opportunities to align waste and toxic chemical reduction efforts with products or
processes that also reduce carbon.
Progress on the 2015 State Plan
Ecology estimates progress was made on about 56 percent of the 175 actions in the 2015 plan.
Seven percent were completed, 15 percent had significant progress, and 34 percent had some
progress.
Accomplishment highlights
• Progress continues on reducing and eliminating toxic chemicals in products sold in
Washington. The new Safer Products for Washington process was authorized by the State
Legislature in 2019. This allows the state to ban or otherwise restrict toxic chemicals in
consumer products when alternatives are safer, feasible, and available. In accordance with
the Children’s Safe Product Act, Ecology studied and conducted product testing on
children’s clothing, footwear, accessories and jewelry, school supplies, play tents and
upholstered chairs, and seasonal products. One product testing study found dangerously
high levels of toxic cadmium and lead, which led to the recall of 15,000 pieces of children’s
products sold nationwide.
• Interest and support continues to grow for the Product Replacement Program 17 and the
Pollution Prevention Assistance Partnership18 (formerly known as the Local Source Control
Partnership). From 2015–2019, partners conducted nearly 15,000 visits to small businesses
17 Product Replacement Program, Washington State Department of Ecology: https://ecology.wa.gov/Waste-
Toxics/Reducing-toxic-chemicals/Product-Replacement-Program
18 Pollution prevention assistance, Washington State Department of Ecology: https://ecology.wa.gov/Regulations-
Permits/Guidance-technical-assistance/Pollution-prevention-assistance
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 16 August 2021
and helped resolve 90 percent of the nearly 9,000 issues they identified. The Legislature
appropriated more than $3 million in 2019 to fund the Product Replacement Program to
reimburse some costs to businesses that switch to safer alternatives.
• Toxic chemicals, their impacts, and the availability of certain safer alternatives are better
understood. Ecology completed studies (often referred to as chemical action plans)
addressing PCBs19 and PFAS,20 and completed alternative assessments for PFAS in food
packaging to prohibit some applications starting in 2023.21
• Washington businesses reduced waste and emissions, toxic chemical use, resource use,
and saved money through pollution prevention planning and technical assistance from
Ecology. Ecology provides technical assistance for implementing pollution prevention
improvements or toxics reduction projects. In 2019, the 500 Washington businesses
required to submit plans to Ecology identifying voluntary reductions in waste or resource
use estimated saving $3.9 million in operating costs, 704 million kilowatt hours in energy
use, and 533 million gallons of water. They also estimated reducing carbon dioxide (CO2)
emissions by 320,000 metric tons, toxic chemical use by 65 million pounds, and dangerous
waste by seven million pounds.
• Dangerous waste enforcement penalties helped protect vulnerable communities,
rewarded businesses that play by the rules, and sent a clear message that polluters pay.
When dangerous waste compliance violations occur, Ecology provides technical assistance
to help businesses return to compliance and conducts enforcement when necessary to
protect neighboring communities and prevent pollution. In 2019, Ecology issued the state’s
largest penalty for severely mismanaged dangerous waste.
• More diverse audiences have more information on hazardous waste and toxic chemicals
through more diverse channels. Over the last five years, Ecology published 44 percent more
documents about hazardous waste and toxic chemicals compared to the previous five years,
and doubled the proportion of those published in non-English languages (including Spanish,
Vietnamese, and Korean) from five to 10 percent.
• The Recycling Development Center,22 created in 2019, is working to establish a cleaner and
more sustainable recycling system for Washington. Managed by Ecology in partnership with
the Department of Commerce and a diverse advisory board, the center works to facilitate
19 PCB Chemical Action Plan, Washington State Department of Ecology:
https://apps.ecology.wa.gov/publications/SummaryPages/1507002.html
20 Per- and Polyfluoroalkyl Substances Draft Chemical Action Plan, Washington State Department of Ecology:
https://apps.ecology.wa.gov/publications/summarypages/2004035.html
21 Safer Alternatives to PFAS in Food Packaging: Report to the Legislature, Washington State Department of
Ecology: https://apps.ecology.wa.gov/publications/summarypages/2104007.html
22 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Recycling-Development-Center
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 17 August 2021
research and development, marketing, and policy analysis to bolster recycling markets and
processing in Washington.
• The statewide Contamination Reduction and Outreach Plan,23 or CROP, was developed to
reduce contamination in recycling, as required by a 2019 law. The CROP includes resources
and guidance for local governments to develop their own CROP. Almost all of the local
governments required to complete a local CROP met the June 2020 due date.
• The Recycle Right Campaign 24 addressed recycling contamination reduction. The campaign
includes a partner toolkit for others to use with web, print, radio, and television ads
available in both English and Spanish. The initial campaign, which ran statewide, laid the
groundwork for future campaigns.
• Three more extended producer responsibility laws are in place. Ecology helped implement
a producer-run recycling program for architectural paint.25 This program started in April
2021 and will include more than 170 drop-off locations across the state. It will allow
residents and small businesses to recycle latex and oil-based paints, keeping them out of
landfills and creating new products. The Legislature also passed the nation’s first producer
take-back law for photovoltaic or solar panels.26 The producer-funded Safe Medication
Return Program, overseen by the Washington State Department of Health, provides safe
and convenient disposal of unused pharmaceuticals.27
• Efforts to reduce food waste increased. A new 2019 law required the creation of a joint
agency plan to reduce food waste by 50 percent by 2030. The Use Food Well Washington
Plan 28 focuses on three key strategies: preventing food waste, rescuing edible food, and
recovering inedible food materials for other uses. Ecology, the Washington State
Departments of Agriculture, Health, Commerce, the Office of Superintendent of Public
Instruction, and more than 150 subject matter experts worked together to create the plan.
• Statewide policies to address plastics increased. A ban on plastic carryout bags,29 set to
take effect in 2020, was delayed until 2021 due to the COVID-19 pandemic. Consultants
completed a required study of plastic packaging 30 in fall 2020 that included 10
23 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Recycling-Development-Center/Contamination-
reduction
24 https://ecology.wa.gov/recycleright
25 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Paint-stewardship
26 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Solar-panels
27 Safe Medication Return Program:
https://www.doh.wa.gov/forpublichealthandhealthcareproviders/healthcareprofessionsandfacilities/safemedicationret
urnprogram
28 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Organic-materials/Food-waste-prevention/Food-
waste-plan
29 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Plastic-bag-ban
30 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Plastics-study
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 18 August 2021
recommendations. Legislation (SB 5022 31) that supports some of those recommendations
passed in 2021. The law requires recycled content in many bottles, bans some polystyrene
products, and establishes an on-request food service ware program.
• Studies addressed solid waste management funding concerns. In 2017 we published a
three-part finance study, Funding Mechanisms for Solid Waste,32 to assess and identify
funding mechanisms and make recommendations to strengthen the state’s funding system
for solid waste management.
Current trends
Washington has come a long way from the open burning dumps of the 1960s. This is due to the
hard work of solid waste collection companies, other businesses, local and state government,
and dedicated citizens. We have well-engineered landfills and a recycling infrastructure for
some products. Our recycling, composting, and waste collection programs are some of the most
progressive and successful in the country. However, Asian recycling market shutdowns
highlighted the need for systemic fixes here in Washington and nationally. It also reinforced the
need to focus on the first waste management priority: waste reduction or prevention.
Washington businesses altogether generate hundreds of millions of pounds of hazardous waste
every year, but overall amounts can vary greatly from year to year. The highest annual amounts
occurred in 2013 (nearly 236.7 million pounds, or about 118,350 tons). The lowest amounts
occurred in 2003 (82.6 million pounds, or 41,300 tons) and in 2016 (88.7 million pounds, or
44,350 tons). While a variety of factors influence generation, the variation from year to year is
primarily due to non-recurrent events such as large contamination cleanups, in some cases
from a single source. However, waste generated from recurrent activities appears to have
grown slowly over time, despite the number of significant waste generators remaining mostly
stable overall.
31 https://app.leg.wa.gov/billsummary?BillNumber=5022&Year=2021&Initiative=false
32 https://apps.ecology.wa.gov/publications/summarypages/1707016.html
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 19 August 2021
Solid waste generation
Solid waste generation in Washington is increasing. In
2017 (the most recent year we have data available) it
reached 17.2 million tons; the highest ever measured.
Approximately 52 percent of waste generated in
Washington was disposed in landfills and mixed waste
incinerators, while about 48 percent of waste was
recovered. Washington’s population has also
increased, but at a much slower rate. Since 2000,
population increased by 24 percent, while waste
generation increased by 64 percent, nearly triple the
amount of population increase (Figure 2).
Solid waste includes all discards
from homes and businesses, as
well as waste from
manufacturing and construction.
Recovery includes recycling,
composting, combustion of
source-separated materials, land
application, and anaerobic
digestion.
Figure 2: Solid Waste Generated and Recovered, and Population in Washington, 2000–2017
Since 2000, the solid waste recovery rate (which is the percent of materials collected for
recycling, composting and other beneficial uses) has increased overall, but is no longer at its
peak, as shown in Figure 3. Though we are collecting an increasing amount of materials for
recycling and other recovery, the amount we are disposing of has increased even more. Since
the peak in 2011, recovery has increased by 4 percent, while disposal has increased by 40
percent, leading to an overall decline in the recovery rate. This speaks to the need to reduce
waste.
10.5
17.2
5.9 7.3
3.9
8.3
20
0
0
20
0
1
20
0
2
20
0
3
20
0
4
20
0
5
20
0
6
20
0
7
20
0
8
20
0
9
20
1
0
20
1
1
20
1
2
20
1
3
20
1
4
20
1
5
20
1
6
20
1
7
Population in
millions
Million tons of
waste generated
Million tons of
waste recovered
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 20 August 2021
Figure 3: Recovery Rate in Washington, 2000–2017
For data sources mentioned above and more information on current trends, see the solid waste
and recycling data33 webpage.
Hazardous waste generation
Washington’s dangerous waste regulations34 require businesses that generate more than 220
pounds of hazardous waste in any month or 2,640 pounds in a year to report to Ecology
information on the types and quantities of waste generated and disposed. These businesses
classify as either medium quantity generators (MQGs) or large quantity generators (LQGs),
depending on the amount of hazardous waste they generate. Small quantity generators (SQGs)
that fall below these thresholds are not required to report. Data reported from waste
generators collected since 2003 is analyzed and discussed below.35
While there are presumably many more SQGs than MQGs and LQGs in the state, generating an
unknown amount of hazardous waste, it most likely totals a small fraction of that generated
from MQGs and LQGs. In recent years, the number of MQGs has increased while that of LQGs
has decreased (Figure 4). However, LQGs generate the majority of hazardous waste in our state
overall (Figure 5). Since 2003, LQGs generated more than 94 percent of the total reported,
MQGs generated nearly five percent, and SQGs that voluntarily report generated just over one
percent of the total.
33 https://ecology.wa.gov/Research-Data/Data-resources/Solid-waste-recycling-data
34 Chapter 173-303 WAC: http://app.leg.wa.gov/WAC/default.aspx?cite=173-303
35 Data presented doesn’t include Hanford waste, treatment by generator, permit by rule wastes, mixed wastes, or
activities reported by hazardous waste treatment, storage, and disposal facilities.
37.1%
56.6%
48.5%
0%
10%
20%
30%
40%
50%
60%
20
0
0
20
0
1
20
0
2
20
0
3
20
0
4
20
0
5
20
0
6
20
0
7
20
0
8
20
0
9
20
1
0
20
1
1
20
1
2
20
1
3
20
1
4
20
1
5
20
1
6
20
1
7
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 21 August 2021
Figure 4: Number of hazardous waste generators by generator size, 2003–2020
Figure 5: Pounds of hazardous waste generated annually by generator size, 2003–2020
Hazardous waste generation can fluctuate significantly due to a variety of factors that can
impact a limited number of generators, such as changes to business operations or economic
pressures on related industries. Non-recurrent events can also greatly affect overall generation
(Figure 6). The largest contributor to non-recurrent hazardous waste comes from remediation
of past contamination, with a much smaller amount coming from spills (onto the ground) and
accidental releases (such as into the air or water) or intermittent processes. For example, the
last spike in non-recurrent hazardous waste generation between 2012 and 2014 was primarily
due to one generator disposing of 77.6 million pounds of contaminated soil. Recurrent waste
generation comes primarily from pollution control and waste management processes, and
ongoing production and service processes. Recurrent waste shows less variation than non-
recurrent generation and has grown slowly since 2003.
300
400
500
600
700
800
20
0
3
20
0
4
20
0
5
20
0
6
20
0
7
20
0
8
20
0
9
20
1
0
20
1
1
20
1
2
20
1
3
20
1
4
20
1
5
20
1
6
20
1
7
20
1
8
20
1
9
20
2
0
MQG
LQG
0
50,000,000
100,000,000
150,000,000
200,000,000
250,000,000
20
0
3
20
0
4
20
0
5
20
0
6
20
0
7
20
0
8
20
0
9
20
1
0
20
1
1
20
1
2
20
1
3
20
1
4
20
1
5
20
1
6
20
1
7
20
1
8
20
1
9
20
2
0
MQG
LQG
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 22 August 2021
Figure 6: Combined pounds of hazardous waste generated annually by origin, 2003–2020
Regulation of products and toxic chemicals
Actions to regulate products, especially plastics and those containing toxic chemicals, continues
to increase. In the previous version of the State Plan, Ecology identified eight laws addressing
toxics in products in the previous 12 years. Since 2015, the Legislature passed or amended an
additional 13 laws on products and toxic chemicals, most of which include significant
implementation responsibilities for Ecology. This growth will likely continue, expanding
Ecology’s activities beyond its historical waste management focus. Table 2 summarizes these
laws; a full list can be found in the Reducing Impacts of Materials and Products section. Many
more bills were introduced on these topics than became law.
Table 2: Recent laws addressing toxics and products
Toxics in Products Plastics Extended Producer
Responsibility
•Children’s Safe Product
Act amendments
•PFAS in firefighting foams
•PFAS in food packaging
amendments for
additional restrictions
•Safer Products for
Washington (Toxic
Pollution)
•Plastic product
degradability
•Plastic packaging evaluation
•Plastic bag bans
•Recycled content in plastic
containers
•Expanded polystyrene ban
•On-request food service
ware
•Paint stewardship
•Solar panel takeback
program
•Medication takeback
program
Demographic trends
Population and demographics influence resource use, waste generation, needs for services,
outreach, and environmental justice considerations.
Washington’s population is increasing:
0
50,000,000
100,000,000
150,000,000
200,000,000
250,000,000
20
0
3
20
0
4
20
0
5
20
0
6
20
0
7
20
0
8
20
0
9
20
1
0
20
1
1
20
1
2
20
1
3
20
1
4
20
1
5
20
1
6
20
1
7
20
1
8
20
1
9
20
2
0
Non-recurrent
Recurrent
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 23 August 2021
• As of April 2020, Washington’s population grew to more than 7.6 million people.
• The Washington State Office of Financial Management (OFM) projects state population
will reach 7.9 million by 2025 and 8.6 million by 2035.36
• Since 1990, migration has contributed more to population growth than natural increase
(births minus deaths) and accounts for 63.7 percent of the growth between 2010 and
2020.37
Washington’s ethnic38 and racial diversity is increasing:
• The percentage of Hispanic/Latino residents almost doubled during the 1990s and
reached 13.5 percent in 2020, an increase from 11.2 percent in 2010.39
• While significant numbers of Hispanic/Latino residents live in western metropolitan
counties (notably King, Pierce, and Snohomish), the central and eastern side of the state
has some of the highest percentages. Adams county has the highest proportion at
nearly 70 percent Hispanic/Latino, followed by Franklin county at 55 percent, and
Yakima county at 51 percent.40
• Non-white racial groups made up 21.5 percent of the state population in 2019, an
increase from 17.8 percent in 2010. Asian residents make up the largest minority group
at more than 9 percent, followed by those with two or more races at nearly 5 percent,
and black residents at more than 4 percent. American Indian Alaska Native residents
make up nearly 2 percent and Native Hawaiian or other Pacific Islander residents are
nearly 1 percent of the population.41
36 Washington State Office of Financial Management, "State of Washington Forecase of the State Population
November 2020 Forecast," November 2020,
https://ofm.wa.gov/sites/default/files/public/dataresearch/pop/stfc/stfc_report.pdf, accessed on August 11, 2021.
37 Components of population change, Washington State Office of Financial Management:
https://ofm.wa.gov/washington-data-research/statewide-data/washington-trends/population-changes/components-
population-change
38 Ethnicity is either Hispanic or non-Hispanic, and those in either category can be of any race.
39 Population of Hispanic/Latino origin, Washington State Office of Financial Management:
https://ofm.wa.gov/washington-data-research/statewide-data/washington-trends/population-changes/population-
hispaniclatino-origin
40 Hispanic population as a percent of total population, Washington State Office of Financial Management:
https://ofm.wa.gov/washington-data-research/statewide-data/washington-trends/population-changes/hispanic-
population-percent-total-population
41 State Population Characteristics: 2010-2019, U.S. Census Bureau: https://www.census.gov/data/tables/time-
series/demo/popest/2010s-state-detail.html
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 24 August 2021
Washington’s language diversity is increasing:
• As of 2018, nearly 20 percent of Washington’s population speaks a language other than
English at home, an increase from 14 percent in 2000.42
• After English, Spanish is the most commonly spoken language in the state (9 percent),
followed by Chinese (2 percent) and Vietnamese (1 percent).43 In 2019, Washington’s
percentage of population with limited English proficiency (LEP) was 7.6 percent,
compared to 8.1 percent in 2010 and 6.4 percent in 2000.44
• Nearly 4 percent of state households have residents with limited English proficiency. Of
these, nearly 21 percent use Asian or Pacific Island languages, 18 percent speak Spanish,
nearly 13 percent speak another Indo-European language, and more than 18 percent
use some other language.45
Environmental justice
The passage of Senate Bill 5141 46 (also known as the Healthy Environment for All, or HEAL Act)
during Washington’s 2021 legislative session brings increased direction and resources for
Ecology’s environmental justice work. The state of Washington defines environmental justice
(EJ) in the HEAL Act as:
The fair treatment and meaningful involvement of all people regardless of race, color,
national origin, or income with respect to the development, implementation, and
enforcement of environmental laws, rules, and policies. Environmental justice includes
addressing disproportionate environmental and health impacts in all laws, rules, and
policies with environmental impacts by prioritizing vulnerable populations and
overburdened communities, the equitable distribution of resources and benefits, and
eliminating harm.
Disproportionate and cumulative impacts from health disparities, climate change, and exposure
risks to toxic chemicals or hazardous substances affect some populations more than others.
Creating more equitable approaches takes time, resources, sustained effort, and possibly legal
42 Persons living in households where language other than English is spoken, Washington State Office of Financial
Management: https://ofm.wa.gov/washington-data-research/statewide-data/washington-trends/social-economic-
conditions/language-spoken-home
43 Non-English speakers, Data USA: Washington, Deloitte and Datawheel:
https://datausa.io/profile/geo/washington/#demographics
44 J. Batalova, M. Hanna, and C. Levesque (2021). Frequently requested statistics on immigrants and immigration in
the United States. Migration Policy Institute: https://www.migrationpolicy.org/article/frequently-requested-statistics-
immigrants-and-immigration-united-states-2020#demographic-educational-linguistic
45 American Community Survey 2019 data table for limited English speaking households in Washington, United
States Census Bureau: https://www.census.gov/acs/www/data/data-tables-and-tools
46 Engrossed Second Substitute Senate Bill 5141: http://lawfilesext.leg.wa.gov/biennium/2021-
22/Pdf/Bills/Session%20Laws/Senate/5141-S2.SL.pdf?q=20210702083739
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 25 August 2021
reform. These investments are critical to address environmental justice, including racial equity,
and to fulfill the State Plan’s goals.
Ecology is committed to strategically and continuously improving strategies to eliminate
disproportionate environmental and health impacts and address inequities, and to providing
fair treatment and meaningful involvement for all Washington residents to help shape agency
programs, activities, and decisions. This includes program planning and implementation that
identifies and considers overburdened communities and underserved populations, and
strengthening access for people with limited English proficiency.
Through ongoing assessments and strategic planning, Ecology is determining how best to
incorporate EJ practices into the agency’s work. This includes more than just complying with
the HEAL Act. Ecology is also reviewing the final report of the EJ Task Force convened by the
Interagency Council on Health Disparities47 and a report by Master of Public Administration
(MPA) candidates from the University of Washington’s Evans School of Public Policy and
Governance who conducted a broad assessment of Ecology’s EJ practices and needs at the
agency’s request in 2019.48 A key recommendation in these reports and a HEAL Act
requirement is to use the Washington Department of Health’s Environmental Health Disparities
(EHD) data and mapping tool to identify areas with cumulative impacts and EJ considerations.
Ecology’s Hazardous Waste and Toxics Reduction program (HWTR) is currently using mapping
tools such as the EPA’s EJSCREEN 49 and the EHD map to begin analyzing service equity and
cumulative impacts to overburdened communities. Ecology’s Solid Waste Management
program (SWM) uses the EHD map as part of the scoring criteria in Public Participation Grant
applications.50
Several of the goals and actions in this plan include opportunities to address EJ and adopt new
approaches. Ecology acknowledges that many more EJ opportunities and needs exist with not-
yet-clearly-defined actions or practices. Ecology recognizes there is still much more work to do
and will continue to invest in and further its commitment to EJ, equity, and anti-racism—and
encourages others, including partners and local government, to embrace a similar approach.
47 Health Equity Council, "Environmental Justice Task Force Recommendations for Prioritizing EJ in Washington
State Government," Fall 2020
https://healthequity.wa.gov/Portals/9/Doc/Publications/Reports/EJTF%20Report_FINAL(1).pdf, accessed August
11, 2021.
48 University of Washington Evans School of Public Policy & Governance, "Embedding Environmental Justice into
the Washington State Department of Ecology," June 1, 2020,
https://digital.lib.washington.edu/researchworks/bitstream/handle/1773/45590/Embedding%20Environmental%20Ju
stice%20into%20the%20Washington%20State%20Department%20of%20Ecology.pdf?sequence=2&isAllowed=y,
accessed on August 11, 2021.
49 EJSCREEN: Environmental justice screening and mapping tool, U.S. Environmental Protection Agency:
https://www.epa.gov/ejscreen
50 Program Guidelines: Public Participation Grants 2019-2021, Washington State Department of Ecology:
https://apps.ecology.wa.gov/publications/documents/1907006.pdf
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 26 August 2021
If the vision is realized….
Visionary goals shared in the 2015 State Plan are still much the same. They depict a vision for
Washington’s future if we are successful in advancing this and future State Plans.
• Greenhouse gas emissions (GHGs) will decrease due in part to wiser management of
materials. Reduced consumption as well as increased reuse and recycling of resources will
be recognized as keys to conserving energy use and reducing associated GHG emissions.
Washington will use food well without wasting it. Innovative uses for organic materials will
help sequester carbon in soils, create bio-energy, and provide food for thriving plants. Less
methane and leachate will be generated due to reduced disposal of organic materials in
landfills.
• Sustainable materials management will be commonplace. Reduction, reuse, and recycling
of plastics, metals, glass, wood, organics, and other materials will be widespread and
supported by producer responsibility and robust markets. More products will be reused or
repaired, resulting in less overall consumption. Recyclable materials will be source-
separated from waste, minimizing contamination.
• Safer products, buildings, and services will be designed for human, economic, and
environmental health and will be readily available. Products, buildings, and services will
minimize hazardous materials throughout their life cycles. Green chemistry 51 will be the
norm. Most toxic threats to human health and the environment from hazardous materials
will be greatly reduced or eliminated. Demand for effective, environmentally preferable
products, buildings, and services will be widespread. Products with toxic components will be
managed in a product stewardship system.
• A stable and long-term solid waste financing system will support and enable the transition
to sustainable materials management. Full costs for managing products, materials, and
wastes from design and manufacture to end-of-life will be accounted for in product prices.
Funding for waste reduction and recycling programs will be shared by producers without
relying solely on waste disposal fees.
• State regulations and infrastructure will support the reduction and eventual elimination
of waste and toxics. Local waste management plans and pollution prevention plans will
focus on sustainable materials management and toxics reduction. Solid and hazardous
waste management facilities will promote reduction, reuse and recycling, and safe
disposal—and will be in compliance with state and local regulations.
• Washington businesses will thrive and provide sustainable jobs. Businesses, employees,
and communities will prosper in the domestic and global marketplace as they eliminate
waste and replace hazardous materials from products and services with safer ones. Public
51 Green chemistry means designing products and processes to reduce or eliminate hazardous substances.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 27 August 2021
confidence will increase, while risk and liability to the public, waste-management workers,
and others decrease.
• Accessible and timely measurement systems will track the life-cycle impacts of materials,
products, waste, and toxic chemicals. Important data gaps will be identified and systems
developed for producer reporting. Data will provide useful information for stakeholders and
direct state and local programs and priorities.
• Environmental equity and justice for waste and toxics related issues will be realized for all
Washington residents. Health disparities will be eliminated from toxic exposures through
people’s jobs, communities, and homes. All residents will have equitable access to solid and
hazardous waste services.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 28 August 2021
Plan Goals and Actions
Section One: Managing Hazardous Waste and Materials
Introduction
Properly managing hazardous waste and materials (also referred to as hazardous substances or
toxic chemicals) helps protect our environment. Improper management can lead to pollution
and contaminated sites, which negatively impacts our environment and, in many cases, human
health. The costs of cleaning up contaminated sites are an external cost of hazardous waste and
materials that often falls to businesses and taxpayers.
Most of the authority to regulate hazardous waste and materials in Washington state falls
under our Hazardous Waste and Toxics Reduction (HWTR) Program.52 HWTR program activities
focus on toxics reduction through pollution prevention (P2), compliance with regulations, and
permitting and corrective action n at facilities that manage hazardous wastes.
Federal law uses the term hazardous waste to refer to the hazardous waste it regulates.
Washington state uses the term dangerous waste to refer to hazardous wastes that are
regulated by the state53 but not included in the federal definition. In this plan, Ecology generally
uses the term hazardous waste, but when referring to regulatory actions, uses the term
dangerous waste.
Even small amounts of hazardous waste can cause safety hazards and environmental impacts.
Local governments, under the authority of state laws and regulations, primarily manage small
quantities of dangerous wastes created by businesses or households. Washington law refers to
this combined waste as moderate risk waste (MRW). Ecology regulates most aspects of MRW
in Washington.
Authorizing framework: implementation and issues
Pollution prevention
Washington state’s Waste Reduction Act54 passed in 1990. It requires businesses or public
agencies to prepare “voluntary reduction plans”55—referred to as Pollution Prevention (P2)
plans56—if they meet one of the following criteria:
• Generate 2,640 pounds or more of recurrent hazardous waste annually.
52 https://ecology.wa.gov/About-us/Get-to-know-us/Our-Programs/Hazardous-Waste-Toxics-Reduction
53 Chapter 173-303 WAC: http://app.leg.wa.gov/WAC/default.aspx?cite=173-303
54 Chapter 70A.214 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.214
55 Chapter 70A.214.110 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.214.110
56 https://ecology.wa.gov/P2Plan
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 29 August 2021
• Report toxic releases as part of the federal Toxics Release Inventory57 requirement in
the federal Emergency Planning and Community Right-to-Know Act.58
Chapter 173-307-030 of the Washington Administration Code (WAC)59 states that P2 plans
must consider opportunities to reduce generation of hazardous waste and use of hazardous
substances 60 (as defined by Chapter 173-307-020 WAC61). P2 plans can also address a broad
range of environmental solutions, including:
• Waste reduction.
• Water use reduction.
• Energy efficiency.
• Hazardous substance and toxic chemical use reduction or elimination.
Chapter 173-307-080 WAC 62 states that annual progress reports “must be submitted” to
Ecology. However, implementing reduction opportunities identified in P2 plans is voluntary.
Ecology offers technical assistance, and in some cases financial incentives, to help businesses
identify reduction opportunities and implement projects, with special emphasis on addressing
upstream uses or production.
Compliance and compliance assistance
State authority for managing dangerous waste derives from the 1976 federal Resource
Conservation and Recovery Act63 (RCRA) and the 1976 state Hazardous Waste Management
Act.64
Medium and large quantity generators
The foundation of our compliance efforts are the state’s Dangerous Waste Regulations.65 These
regulations require businesses to file an annual report with us if they generate more than 220
pounds of dangerous wastes in any month or 2,640 pounds per year. These businesses classify
as medium quantity generators (MQGs) or large quantity generators (LQGs), depending on the
amount of dangerous wastes they generate.
Ecology responds to complaints and requests from the public and local government, and
conducts formal inspections of dangerous waste generators to evaluate their compliance with
regulations. While waste amounts can vary greatly from year to year for an individual waste
57 https://ecology.wa.gov/TRI
58 https://www.epa.gov/epcra/what-epcra
59 Chapter 173-307-030 WAC: https://apps.leg.wa.gov/WAC/default.aspx?cite=173-307-030
60 Download Washington State Pollution Prevention Planning Hazardous Substances List:
https://ecology.wa.gov/Asset-Collections/Doc-Assets/Regulations-Permits/Reporting-requirements/Dangerous-
waste-reporting-requirements/Pollution-Prevention-Plan/Washington-State-Pollution-Prevention-Planning-Haz
61 Chapter 173-307-202 WAC: https://apps.leg.wa.gov/WAC/default.aspx?cite=173-307-020
62 Chapter 173-307-080 WAC: https://apps.leg.wa.gov/WAC/default.aspx?cite=173-307-080
63 https://www.epa.gov/rcra
64 Chapter 70A.300 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.300
65 Chapter 173-303 WAC: http://app.leg.wa.gov/WAC/default.aspx?cite=173-303
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 30 August 2021
generator, more than 1,000 Washington businesses were medium and large quantity
generators subject to formal compliance inspections in 2020.
In addition, Ecology provides informal technical assistance visits to help waste generators and
businesses address concerns and implement best practices to avoid problems before they
occur. Ecology is exploring how best to prioritize compliance efforts—including environmental
justice considerations, such as disproportionate impacts to overburdened communities.
Small quantity generators
There are more small quantity generators (SQGs) than MQGs and LQGs. In 2020, there were
about 1,300 SQGs in Washington. Although SQGs collectively generate a significant amount of
dangerous waste, Ecology employees are not required to—and typically do not—inspect SQGs
due to staffing constraints. Local governments, however, have the authority to oversee and
assist these SQGs. For more information about SQGs, see the Small Volume Hazardous Wastes
and Materials section of this plan.
In 2007, Ecology established the Pollution Prevention Assistance (PPA) partnership to
coordinate with specialists at local jurisdictions who visit SQGs and provide technical
assistance.66 Ecology supports partners that provide pollution prevention and waste
management assistance to local businesses. To date, these partners have completed more than
35,000 visits and follow up contacts at nearly 21,000 businesses—helping them properly
manage their wastes and correct more than 36,000 issues.
In late 2019, we launched a complimentary Product Replacement Program (PRP) to help SQGs
who generate specific waste streams switch to using safer alternative products or processes.
For example, in 2019–2020 we found 108 dry cleaners across the state using perchlorethylene
dry cleaning washing machines and determined that at least 57 would be interested in
switching to a safer alternative. By the end of 2020, we helped 39 dry cleaners replace their
systems and receive reimbursements totaling $690,000. Similar efforts are underway to
address per- and polyfluoroalkyl substances (PFAS, a class of toxic chemicals) in firefighting
foam, polychlorinated biphenyls (PCBs) in light ballasts and building materials, flame retardants
in exercise equipment and gyms, and mercury-containing thermostats.
Permitting and corrective action
Ecology issues waste management permits to facilities that treat, store, or dispose of dangerous
waste, called treatment, storage, and disposal (TSD) facilities. These facilities provide services
to industries and local governments for safe management and disposal of their dangerous
waste. The permits ensure that TSD facility design, construction, maintenance, and operations
protect people and the environment. A TSD facility must meet the conditions of its permit and
66 Visit the pollution prevention assistance webpage (ecology.wa.gov/PPA) for a list of partners and their locations.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 31 August 2021
comply with state and federal regulations during its operation, as well as when it ceases
operations and when it closes. Washington currently has 10 active TSD facilities.67
If toxic chemicals are released or contamination occurs during TSD facility operation, facility
owners may be required to take corrective action according to the dangerous waste
regulations.68 These regulations incorporate cleanup processes under the Hazardous Waste
Cleanup—Model Toxics Control Act.69 Ecology oversees TSD closure and corrective action
cleanup at these sites. Washington currently has 42 sites of former TSD facilities conducting
corrective action clean up or long term monitoring activities.
Small volume hazardous wastes and materials
Washington’s Hazardous Waste Management Act 70 authorizes local governments to regulate
moderate risk waste (MRW), with assistance from Ecology. The term moderate risk waste can
be misleading. These wastes are not necessarily moderate in risks to human health and
environment or moderate in quantity. Therefore, it is important to have programs in place to
manage these wastes.
Two types of waste are considered MRW:
• Household hazardous waste. Household residents disposing of hazardous products—
such as pesticides and paint strippers—generate these wastes.
• Small quantity generator (SGQ) waste. Businesses that produce less than 220 pounds of
dangerous waste per month (with some exceptions) generate SQG wastes.
This statute also requires local governments to write hazardous waste management plans to
address these wastes.71 While all local governments originally submitted hazardous waste
management plans to Ecology, over time many local governments began including the contents
of hazardous waste plans in their solid waste management plans, referred to as combined
plans. Plans address proper MRW management and education about reducing, recycling, and
disposing of MRW in the jurisdiction, including for used oil.72
For household hazardous wastes, local governments operate fixed collection facilities,
collection events, or both. They can also provide households with information about how to
reduce waste generation or properly recycle or dispose of wastes. Local governments rely
heavily on state Local Solid Waste and Financial Assistance (LSWFA) grant funds appropriated
by the Legislature to provide these services. In the 2017–2019 biennium, 54 percent of LSFWA
funds dedicated to planning and implementation were used to provide MRW services, which
was 38 percent of all LSFWA funds (including those allocated for enforcement). Over the past
67 For a list of current permitted sites, see https://ecology.wa.gov/Regulations-Permits/Permits-
certifications/Dangerous-waste-permits
68 Chapter 173-303 WAC: http://app.leg.wa.gov/WAC/default.aspx?cite=173-303
69 Chapter 70A.305 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.305
70 Chapter 70A.300 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.300
71 Local Governments to Prepare Local Hazardous Waste Plans, Chapter 70.300.350 RCW:
https://app.leg.wa.gov/RCW/default.aspx?cite=70A.300.350
72 Used Oil Recycling, Chapter 70A.224 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.224
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 32 August 2021
decade, LSWFA funds have been significantly reduced, resulting in less available funding for
MRW services.
Some collection facilities also accept SQG wastes. If not, the SQG may contract directly with a
private company to collect their waste. Other options to dispose of some types of MRW
include:
• The network of businesses that, for a fee, collect used oil, antifreeze, and batteries.
• Some of the state’s product stewardship programs:
o LightRecyle 73 for mercury-containing bulbs.
o E-Cycle 74 for some electronic waste.
o PaintCare 75 for various paints, coatings, stains, and sealers—starting in 2021.
Ecology estimates that current MRW collection programs capture somewhere between 30 to
35 percent of all MRW generated, based on reported data and calculations from Washington’s
2016 waste characterization study.76 Unless taken to programs such as those described above,
most people dispose of MRW with other solid wastes, which are then landfilled or incinerated.
While there are no federal or state laws banning the landfill disposal of most MRW, some local
governments discourage this activity through ordinance. Collecting more MRW is desirable, but
funding to support MRW facilities and programs is hard to come by.
Future directions: looking ahead
Reducing and safely managing hazardous waste and materials is important because it protects
people and the environment, saves money, helps prevent expensive clean ups, and is good for
the economy. We will need to continue and strengthen partnerships between Ecology, local
government, and private businesses to be successful in toxics reduction and hazardous waste
management efforts.
Improving pollution prevention through safer alternatives
Pollution prevention makes good economic sense. Washington businesses have saved an
estimated $7 million per year due to implementing their P2 plans.77 The actual amount may be
much higher because businesses are not required to report cost savings.
In the past, our efforts with P2 planning focused on assisting businesses and government
facilities to reduce hazardous waste. Ecology expects to increase our focus on encouraging
facilities to switch to safer alternatives for toxic chemicals or processes, to prevent generating
hazardous waste in the first place.
73 http://www.lightrecycle.org/
74 https://ecology.wa.gov/ecycle
75 https://www.paintcare.org/paintcare-states/washington/#/new-program-in-2020
76 https://apps.ecology.wa.gov/publications/SummaryPages/1607032.html
77 Based on estimates of $56 million saved between 2005 and 2013. For more information, see the 2013 publication,
Focus on Pollution Prevention: https://apps.ecology.wa.gov/publications/SummaryPages/1104023.html
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 33 August 2021
Improving hazardous waste compliance
Ecology continues to streamline our hazardous waste compliance process, make improvements,
and measure progress towards implementing more effective inspections.
For example:
• Ecology regularly updates the regulations and many of our publications to be more user
friendly, many which were updated during the COVID-19 pandemic.
• Ecology improved much of our regulatory guidance to help waste generators better
prepare for compliance inspections.
• Ecology initiated an analysis to identify key factors associated with regulatory
compliance and will continue working to align inspection priorities (including
environmental justice considerations) with these identifiers.
These approaches will help direct resources to areas where Ecology can realize the greatest
positive effect of regulatory compliance.
Expanding partnerships and programs
Currently, Ecology’s Pollution Prevention Assistance (PPA) partnership includes counties and
cities along Puget Sound and the Salish Sea basin, Clark County, and Spokane County. Ecology,
PPA partners, and other municipal organizations interested in joining the partnership have
expressed support for expanding these opportunities to more counties and health districts—
especially in urban centers east of the Cascades, where a large number of SQGs and lower
income populations are located.
Likewise, Ecology hopes to expand the successful Product Replacement Program to include
options for additional products and toxic chemicals. However, additional funding is necessary to
provide these expanded opportunities and support to more areas and businesses.
Filling the funding gap for MRW services
With state population expected to grow, there is continued need for MRW services. However,
reduced grant funding has led to a reduction in services in some areas. For example, MRW
facilities may limit the types of wastes they collect or reduce the hours they are open to the
public.
Appropriated funding for the Local Solid Waste and Financial Assistance (LSWFA) program has
recently been increased, and there is hope this will continue, allowing counties to continue and
perhaps restore some MRW services.
Even when full grant funding was available, MRW services were limited and MRW
infrastructure needs were not fully met. This indicates that more resources are needed to safely
manage household hazardous wastes. Product stewardship programs—in which the products’
producers pay for collection, recycling, or safe disposal of their products—can help fill the gap
between funding and demand for services. These programs increasingly help provide collection
options for some materials typically collected at MRW facilities, such as electronics and
mercury-containing lights. Bills have been introduced in other states to establish product
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 34 August 2021
stewardship programs for all household products containing hazardous substances. This is
needed to truly provide for sufficient collection opportunities and safe management of these
products.
Pollution prevention (P2) goals and actions
GOAL HWM 1: Hazardous waste generators significantly reduce chemical use, waste, emissions,
and costs by successfully implementing effective P2 plans and taking other actions. These
generators and other industries also use cleaner, more sustainable manufacturing processes
and produce less toxic and more sustainable products.
Action HWM 1A: Increase staff focus on implementing P2 opportunities that reduce the
toxicity of business processes and products.
Action HWM 1B: Provide technical assistance (through site visits, P2 plan review and
assistance, and toxics reduction project implementation assistance) to businesses and
public agencies to encourage toxic chemical reduction in business processes and
products. Consider racial equality and accessible language when planning and
conducting outreach.
Action HWM 1C: Invest in understanding business needs, improving services, and
delivering them equitably. Survey facilities and share information on the benefits of P2
opportunities and sustainability.
Action HWM 1D: Measure staff-driven reduction opportunities on an annual basis,
working towards a goal of generating new P2 opportunities from 50 percent of all P2
technical assistance site visits. Identify racial equity, health disparities, and
socioeconomic factors associated with P2 opportunities, to inform selection and
implementation of reduction projects.
Action HWM 1E: Develop and implement state or regional efforts to encourage use of
safer chemical alternatives and processes in partnership with various business
associations, interested local jurisdictions, nonprofit organizations, and community
groups. Conduct an equity analysis to inform technical assistance efforts, including
assessment of racial equity, health disparities, and language access considerations.
Action HWM 1F: Establish toxic reduction projects that measurably reduce at least 10
percent of pounds or dollars spent in one of the following areas (in order of priority):
• Toxic chemicals used in processes.
• Toxic chemicals in products.
• Toxic Reduction Inventory emissions.
• Hazardous waste generated.
• Other measurable environmental impacts (e.g., energy use, water use/quality,
solid waste generation).
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 35 August 2021
Compliance and compliance assistance goals and actions
GOAL HWM 2: Large quantity generators (LQGs) and medium quantity generators (MQGs)
comply with the dangerous waste regulations.
Action HWM 2A: Continue to inspect MQGs and LQGs, making these inspections as
effective and efficient as possible for the business community, Ecology inspectors, and
Washington residents.
Action HWM 2B: Track and analyze inspection data to determine effectiveness,
including number of inspections, violations returned to compliance, violations returned
to compliance within 30 days, changes in facility history, number of enforcements, and
regulated community size.
GOAL HWM 3: Facilities have the necessary awareness and information resources to effectively
make compliance corrections.
Action HWM 3A: Conduct sector campaigns to inform select businesses about
compliance issues, P2, or safer chemical alternatives to address significant, widespread,
or recurring compliance issues. Partner with other regulatory agencies, air authorities,
local governments, nonprofit organizations, community groups, and small business
assistance programs on these campaigns as appropriate.
Action HWM 3B: Provide cost-effective training or educational resources (in multiple
languages as appropriate) to dangerous waste generators. Examples include topic-
specific publications, designation and how-to videos, website updates, and workshops.
Action HWM 3C: Seek opportunities to partner with businesses, people of color, and
native speakers for feedback on communication products to ensure cultural
competency and accurate translations.
GOAL HWM 4: Fewer environmental issues are found at SQGs and local businesses.
Action HWM 4A: Align the Pollution Prevention Assistance (PPA) partnership, Product
Replacement Program (PRP), and other small business technical assistance efforts with
our toxics reduction strategy and other chemical priorities. Conduct an environmental
justice review and share results, guidance, and information about areas of high concern
with the partners.
Action HWM 4B: Expand the PPA partnership to more areas of the state, increasing the
number of participating jurisdictions from 21 to 26, and increasing support to sustain or
increase small business technical assistance visits. Program expansion will prioritize less-
served geographic areas. Ecology may use the distribution of black, indigenous, and
people of color (BIPOC) communities within new participating jurisdictions to help
determine funding decisions.
Action HWM 4C: Help collect and dispose of firefighting foam containing per- and
polyfluoroalkyl substances (PFAS, a class of toxic chemicals) currently housed at or
managed by state fire departments and the Washington Department of Transportation.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 36 August 2021
Action HWM 4D: Continue offering the PRP to replace perchloroethylene-using dry
cleaning equipment with cleaner professional wet cleaning or hydrocarbon machines at
businesses across the state. Continue providing outreach communication with
appropriate languages and cultural messaging.
Action HWM 4E: Identify safer alternatives and help replace foam pits that contain
polybrominated diphenyl ethers (PBDE, a class of fire retardant chemicals) at five
gymnasiums.
Action HWM 4F: Provide culturally relevant technical assistance in appropriate
languages to support small businesses with best management practices to prevent
stormwater pollution. Encourage local governments to develop relationships with
community-based organizations to reach underserved communities and business
owners.
Permitting and corrective action goals and actions
GOAL HWM 5: All treatment, storage, and disposal facilities (TSDs) comply with regulations and
operate safely.
Action HWM 5A: Maintain inspector staffing to allow for sufficient compliance,
enforcement, and information-sharing activities with TSDs.
Action HWM 5B: Ensure that permittees develop clear, implementable operating
permits during permit renewal.
GOAL HWM 6: Potentially liable parties safely manage and work to clean up environmental
contamination at their corrective action sites.
Action HWM 6A: Follow a corrective action program implementation plan as required
by the Performance Partnership Agreement between EPA and Ecology.
GOAL HWM 7: Parties interested in permitted facilities and corrective action sites will know
who to contact and where to find current information.
Action HWM 7A: Maintain public access to each corrective action site’s information,
including links to each site’s electronic document repository on our dangerous waste
facility cleanup 78 webpage.
Action HWM 7B: Maintain and follow a communication and public participation plan for
every corrective action site. Plans address providing inclusive and accessible
information, effective ways to provide feedback, and how Ecology will address feedback
and provide rationale for decisions.
Action HWM 7C: Review available demographic and environmental data to identify and
prioritize work in areas with cumulative impacts, and encourage local jurisdictions to
look at cumulative effects of multiple permits when siting new facilities. Use
78 https://ecology.wa.gov/Spills-Cleanup/Contamination-cleanup/Cleanup-sites/Dangerous-waste-facility-cleanup
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 37 August 2021
environmental, demographic, and health disparities data (from such sources as the
Washington Tracking Network, U.S. Census, and the U.S. Centers for Disease Control and
Prevention and the Agency for Toxic Substances and Disease Registry Social
Vulnerability Index79) to inform permit decisions for new facilities and support siting in
environmentally just ways to reduce harm to historically underserved or low-income
areas.
GOAL HWM 8: Dangerous waste facilities and used oil processors maintain financial assurance
to ensure ability to safely close.
Action HWM 8A: Ensure each facility has an adequate closure plan and financial
assurance.
Small volume hazardous waste and materials (moderate risk waste)
goals and actions
GOAL HWM 9: Until toxic chemicals are phased out of products and hazardous product use
declines, moderate risk waste (MRW) collection is maximized.
Action HWM 9A: Encourage as much MRW reuse and recycling as appropriate. Promote
opportunities to increase reuse and recycling as new technologies and markets develop
for MRW materials.
Action HWM 9B: Work with local government health departments, waste collection
companies, stewardship organizations, and state waste and recycling associations to
explore options to increase MRW collection and recycling, especially in underserved
areas.
Action HWM 9C: Coordinate with stewardship organizations, local governments and
collection companies to increase inclusive and effective education and outreach efforts
to residents and small businesses. These education and outreach efforts will focus on
MRW services, safe handling, and disposal options, as well as less-toxic alternatives.
Action HWM 9D: Research reduction, recycling, and disposal options for emerging MRW
waste streams, and develop guidance documents when appropriate.
GOAL HWM 10: MRW locations and programs provide increased services for residents,
businesses, and underserved communities, with a focus on equity and accessibility.
Action HWM 10A: Actively support existing programs and advocate for new product
stewardship programs for toxic or hard-to-handle products (including household
hazardous waste and batteries) as a way to increase collection and recycling
opportunities across the state.
79 U.S. Centers for Disease Control and the Agency for Toxic Substances and Disease Registry (CDC/ATSDR)
Social Vulnerability Index interactive map, U.S. Department of Health and Human Services:
https://svi.cdc.gov/map.html
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 38 August 2021
Action HWM 10B: Track efforts and promote options to increase MRW services in
underserved areas, multi-family residences, and for small businesses, and measure
progress.
GOAL HWM 11: Facilities that collect MRW are properly permitted (if required) and in
compliance with applicable laws and rules.
Action HWM 11A: Provide ongoing technical assistance to health departments and
facilities that collect MRW, including local government facilities, retail locations, and
collection centers under product stewardship programs. Encourage local health
departments to conduct routine inspections of all MRW facilities and conduct
inspections of other locations as required.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 39 August 2021
Section Two: Managing Solid Waste and Materials
Introduction
Solid waste is a broad term that applies to wastes and materials from a variety of activities and
sectors. It includes municipal solid waste and recyclables (from households and businesses),
organic materials (yard and food debris), and construction and demolition debris.
Washington’s solid waste system focuses on making sure residents have access to waste and
recycling services, and that waste handling facilities are properly managed to protect human
and environmental health. Many jurisdictions also work on reducing waste through a variety of
activities and outreach.
Solid waste management’s evolving landscape
Prior to and throughout most of the twentieth century, solid waste management focused on
safe garbage disposal and landfill management. This is still an ongoing concern.
As people became more aware of finite natural resources and increasing threats from pollution,
the focus grew to include recycling. In response, Washington state established some of the
leading recycling programs in the country, starting in the early 1990s.
Recently, systemic problems—such as the loss of overseas markets for recyclable materials and
contamination in collected recyclable materials—revealed that we must re-evaluate recycling
programs. These problems also illustrate the need to increase efforts on waste prevention and
source reduction.
While much attention is given to residential waste and materials management issues, the
commercial sector (also called the industrial, commercial, and institutional sector—or ICI
sector) generates more waste and recycles more material than the residential sector. Based on
solid waste and recycling data:80
• The residential sector is responsible for 45 percent of disposed (landfilled and
incinerated) wastes and 15 percent of recovered materials (i.e., recycled and
composted).
• The ICI sector is accountable for 55 percent of disposed wastes and 85 percent of
recovered materials.
Authorizing framework: implementation and issues
Local governments have primary responsibility for regulating and overseeing management of
solid waste in Washington.81 Counties, jurisdictional health departments, and cities share this
responsibility. Often working with collection companies, local governments provide programs
80 https://ecology.wa.gov/Research-Data/Data-resources/Solid-waste-recycling-data
81 Cities and Towns—Miscellaneous Provisions, Chapter 35.21 RCW:
http://app.leg.wa.gov/RCW/default.aspx?cite=35.21
Counties Solid Waste Disposal, Chapter 36.58 RCW: http://app.leg.wa.gov/RCW/default.aspx?cite=36.58
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 40 August 2021
and some infrastructure including transfer stations, recycling drop-boxes, and—in some
instances—composting operations, landfills, and even collection vehicles and bins. Laws,
regulations, and local codes provide direction.
Ecology’s Solid Waste Management program 82 provides assistance to and oversight of waste
reduction, recycling, organics conversion, and disposal programs. Activities include:
• Technical assistance on solid waste handling facility performance and landfill
monitoring;
• Local waste plan guidance; and
• Grant funding for cleanup, waste reduction, recycling projects and enforcement.
The Washington Utilities and Transportation Commission 83 (UTC) regulates the state’s key solid
waste management service providers: the solid waste collection companies.84 These companies
play a major role in collecting and hauling waste, recyclables, and organics. They may also
operate transfer stations, landfills, and waste-to-energy, composting, and recycling facilities.
Counties must use the UTC-franchised service provider for garbage collection, but may contract
for residential curbside recycling. Cities may choose to use the UTC- franchised service provider,
contract for services, or provide their own services.
The main statute governing solid waste is Solid Waste Management—Reduction and
Recycling.85 This broad-reaching statute was originally written in 1969 and has been amended
many times.
Solid waste system issues
Solid waste system financing
Much of Washington state’s solid waste system financing relies on solid waste disposal fees or
tipping fees, along with service charges and some grant funding. The system’s financial needs
include the costs of meeting existing regulatory requirements, long-term care of landfills, and
recycling and waste reduction programs. Local governments in particular are concerned about
how to sustain funding for solid waste infrastructure and programs when the goal is to reduce
waste disposal—the source of significant funding.
Drop off recycling programs are often funded by tipping fees or grants. Curbside collection of
garbage and recyclables is funded by ratepayers. In the franchise system overseen by the UTC,
rates are approved by the commission, and costs for both waste and recycling must appear on
the bill as separate line items. Cities, however, do not often show a separated cost for recycling
in the overall garbage bill.
82 https://ecology.wa.gov/About-us/Get-to-know-us/Our-Programs/Solid-Waste-Management
83 http://www.utc.wa.gov/Pages/default.aspx
84 Solid Waste Collection Companies, Chapter 81.77 RCW: http://app.leg.wa.gov/RCW/default.aspx?cite=81.77
85 Chapter 70A.205 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 41 August 2021
In 2017, Ecology contracted for research on alternative funding mechanisms for waste
reduction and recycling. The three-part study, “Funding mechanisms for Solid Waste,” provide
useful recommendations, even though recycling markets have been disrupted by overseas
import restrictions in recent years.86
Local solid waste plans
Counties are required to prepare local solid waste plans,85 which are a linchpin of Washington’s
solid waste system. Cities can choose to sign onto county plans or create their own plan.
Local solid waste plans must include information about disposal, financing systems, recycling,
composting, and waste reduction programs, as applicable.
In 2019, a law passed 87 that required counties with more than 25,000 residents to include a
contamination reduction and outreach plan (CROP) within their solid waste plan to help reduce
recycling contamination.
Local governments are also required to adopt hazardous waste management plans under the
Hazardous Waste Management statute.88 Increasingly, local governments are combining the
hazardous waste and solid waste plans into one document.
Ecology’s grant programs
Local solid waste plans must be complete and in good standing for the jurisdiction to receive
grant funding from our Local Solid Waste Financial Assistance program.89 This assistance is
often an important part of local funding to prepare required waste plans and to implement
waste reduction, recycling, and solid waste enforcement programs.
The Hazardous Waste Cleanup—Model Toxics Control Act 90 specifies the use of funds collected
under this law for local waste plans and programs. Funding for these grants has been
significantly reduced in the past decade, creating challenges for many local jurisdictions.
Fortunately, funding was restored to historic levels in the 2021–2023 biennial budget.
Ecology also provides funds for waste reduction and recycling through two competitive grant
programs:
• Public Participation Grants91 are for individuals and not-for-profit public interest
organizations to implement the state’s waste management priorities. They can also be
used to increase public understanding and involvement in cleaning up contaminated
sites.
86 For more information, see the Financing Solid Waste for the Future section on this webpage:
https://ecology.wa.gov/Waste-Toxics/Solid-waste-litter/Solid-waste
87 https://app.leg.wa.gov/billsummary?BillNumber=1543&Year=2019&Initiative=false
88 Chapter 70A.300 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.300
89 https://ecology.wa.gov/programs/swfa/grants/cpg.html
90 Chapter 70A.305 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.305
91 https://ecology.wa.gov/ppgrants
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 42 August 2021
• Waste Reduction and Recycling Education Grants 92 are for local governments and non-
profit organizations to design local or statewide education programs to help the public
with litter control, waste reduction, recycling, and composting.
Solid waste, materials, and infrastructure
Waste reduction and recycling
Washington’s waste management hierarchy has been in statute93 since 1984. It places waste
reduction as the highest priority for managing waste, followed by recycling, and then
responsible disposal (energy recovery, incineration, or landfill).
The 1989 Waste Not Washington Act established a 50 percent recycling goal. In 2011, the state
met this 50 percent recycling goal, but the percent recycled has since declined below that goal.
Ecology is now emphasizing the waste generation measure instead of a recycling rate. This is a
more accurate way to assess if Washington residents and businesses are truly reducing waste.
We are not. From 2000–2017, Washington’s population increased by 24 percent and waste
generation increased by nearly triple that amount (64%). While waste reduction has been the
highest priority for waste management in statute since 1984, we are not yet moving in the right
direction. For the most recent data, download the Solid Waste Generated and Recovered in
Washington spreadsheet.94
Commingled recycling
Under state law, local governments are required to plan for and provide access to recycling via
curbside, drop boxes (which is more common in rural areas), or both. Most of Washington’s
curbside recycling programs collect commingled materials, in which all recyclable materials
from the household are placed into one bin. Material recovery facilities (MRFs) sort these
recyclables into separate commodities which are baled and sent to other facilities for
processing into materials that can then be used to make new products.
Commingled recycling programs lead to higher collection rates as the ease of putting all
recyclables into one bin leads to increased participation. Unfortunately, commingled recycling
also results in more contamination in the bins. This increased contamination takes two forms:
• Many people place non-recyclable items in bins thinking or hoping the items will be
recycled—sometimes called wishful recycling.
• Despite advanced technology, MRFs are unable to perfectly sort commingled materials.
This results in residual contamination, where some incorrect items are included in bales
(such as metal in plastics bales or plastic in paper bales) and sent to the wrong end user.
Technology that could do a better job of sorting, such as robots, is expensive.
92 https://ecology.wa.gov/WRRED
93 Solid Waste Management—Reduction and Recycling, Chapter 70A.205 RCW:
https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205
94 Downloadable spreadsheet: https://ecology.wa.gov/Asset-Collections/Doc-Assets/Solid-waste/Solid-waste-
recycling-data/WasteGenerationAndRecovery-2017
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 43 August 2021
Multi-family housing is a growing population with unique challenges. Many do not provide
recycling services, but for those that do, contamination issues can be even greater. Residents
tend to move frequently and some may not speak English as their primary language. This
increases difficulties in learning what and how to recycle, if recycling services are even
provided.
Since commingled recycling collection began in the early 2000s, recycling contamination has
been a growing concern—particularly for end-markets in China and other Asian countries. In
2018, China's government implemented new restrictions on what recyclables may be imported
into their country due largely to concerns about contamination. As China was the major buyer
of Washington’s (and other states’) recyclables, this significantly impacted Washington’s
recycling programs and created major recycling disruptions across the country. Other Southeast
Asian countries soon followed China’s lead and imposed import restrictions of their own. There
are now numerous efforts underway, in Washington and nationally, to reduce contamination,
create domestic markets, and “reset recycling.”
In response to the export market restrictions, Washington’s Recycling Development Center 95
was created in 2019. Led by Ecology in coordination with the state’s Department of Commerce
and an advisory board, the center facilitates research and development, marketing, and policy
analysis to bolster recycling markets and processing in the state.
Plastic waste
Plastics are a problematic material. They are increasingly in the news and receiving much public
scrutiny. Major concerns include single-use plastic items, plastic marine debris, litter, micro-
plastics, and improper recycling practices that put residents in developing countries at risk.
According to the Ellen MacArthur Foundation, 32 percent of plastic packaging escapes
collection systems.96 The Pew Charitable Trusts projects the flow of plastic into the ocean to
nearly triple by 2040.97 Significant actions are needed on all levels to reduce this trend.
Only a small percent of plastics are actually recycled—estimated at less than nine percent of all
plastics ever manufactured.98 Some plastics are more easily recycled than others. Plastics with
resin codes 1 (PET—soda or water bottles) or 2 (HDPE—milk jugs) have good markets. However,
plastics with resin codes 3–7 have challenges throughout the recycling system such as sorting,
processing, and available end markets. While plastics provide benefits, including in such things
as durable products and medical supplies, too much of it is being improperly managed.
95 Chapter 70A.240 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.240
96 Ellen Macarthur Foundation, “The New Plastics Economy: Rethinking the Future of Plastics,” 2016,
https://www.newplasticseconomy.org/assets/doc/EllenMacArthurFoundation_TheNewPlasticsEconomy_Pages.pdf,
accessed on July 27, 2021.
97 The Pew Charitable Trusts, “Breaking the Plastic Wave: A Comprehensive Assessment of Pathways Towards
Stopping Ocean Plastic Pollution,” October 23, 2020, https://www.pewtrusts.org/-
/media/assets/2020/10/breakingtheplasticwave_mainreport.pdf, accessed on July 27, 2021.
98 According data from EPA for 2017, the overall plastics recycling rate was 8.4 percent. Read more at
https://www.epa.gov/facts-and-figures-about-materials-waste-and-recycling/plastics-material-specific-data.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 44 August 2021
In 2019, concerns about plastics led to the passage of the Plastic Packaging Evaluation and
Assessment law.99 This law required a third-party state-wide study of plastics management and
recommendations to the Legislature for better plastics management.100 The study was
completed in October 2020 and includes ten recommendations to reduce and manage plastic
packaging in Washington.
Concerns about plastics have also led to an increase in local bans of plastic bags and other
single-use plastic items, as well as a statewide plastic carryout bag ban passed in 2020.101
Funding
The Waste Reduction, Recycling, and Model Litter Control Act (WRRLCA),102 a tax on frequently
littered items, provides funding for roadside litter pickup by Ecology Youth Corps, local
governments, and some state agencies. It also provides funding for Ecology’s waste reduction
and recycling programs, including the new Recycling Development Center.
For a decade (starting with the 2008 recession), a sizable portion of the WRRLCA account was
diverted to other state agencies. This left no funding for litter prevention and reduced litter pick
up, waste reduction, and recycling work.
In the 2019–2021 biennium, most WRRLCA funding was restored by the Legislature, providing
Ecology with resources to bring back work that had been on hold and address the new
challenges of today. However, use of funds was frozen due to economic concerns from the
COVID-19 pandemic. Hopefully there will be full funding and the ability to use it in in the 2021–
2023 biennium.
The Model Toxics Control Account 103 is a main source of funding for Ecology’s technical
assistance for solid waste facilities, local solid waste planning, and grant oversight.
Both of these accounts also fund important solid waste-related grants for local governments
and non-profit organizations and community groups.
Solid waste handling and disposal
Washington state law sets the standards for proper solid waste handling and disposal, which
Ecology regulates in rules. Over the past 40 years, solid waste disposal has become much safer
and far more protective of health, habitat, and natural resources.
Most solid waste handling facilities are regulated under the Solid Waste Handling Standards.104
In 2018, updates to this rule made a number of substantive and clarifying revisions. Key issues
addressed were waste in piles, inert wastes, contaminated soils, and clarification of the
99 Chapter 70A.520 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.520
100 Evaluation, Assessment, and Recommendations for the Responsible Management of Plastic Packaging in
Washington https://apps.ecology.wa.gov/publications/SummaryPages/2007028.html
101 Plastic Bags, Chapter 70A.530 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.530
102 Chapter 70A.200 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.200
103 Model Toxics Control Operating Account, Chapter 70A.305.180 RCW:
https://app.leg.wa.gov/rcw/default.aspx?cite=70A.305.180
104 Chapter 173-350 WAC: http://app.leg.wa.gov/WAC/default.aspx?cite=173-350
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 45 August 2021
definition of waste versus commodity. Municipal solid waste landfills are regulated under
Criteria for Municipal Solid Waste Landfills,105 which was updated in 2012.
Local health departments have permitting authority for solid waste handling and disposal
facilities in their jurisdictions. Ecology engineers, hydrogeologists, and facility specialists provide
technical assistance to the health departments as well as solid waste facility owners and
operators.
Ecology staff also oversees cleanup at several solid waste landfills throughout the state. There
are nearly a thousand solid waste handling facilities of various types, sizes, and purposes in the
state, including 14 operating municipal solid waste landfills.106
Since tracking first started in 1991, disposal has been moving from public to privately owned
landfills. The privately owned Roosevelt Regional Landfill in Klickitat County is the state’s
biggest landfill and takes waste from more than 25 counties, as well as from other states and
Canada. A large privately owned landfill in Oregon also takes wastes from some Washington
jurisdictions. In all, there are 13 municipal solid waste landfills operating in the state: 11
publicly owned and 3 privately. These landfills received 5.5 million tons of waste in 2019 and
have an estimated capacity of 280 million tons, or about 40 years at current disposal rates.
There is also one Waste-to-Energy Facility in Spokane—the only incinerator in the state that
burns municipal solid waste.
While there are fewer operating publicly owned landfills, there are many closed landfills that
local governments must maintain and monitor for many years. In addition, local governments
own and operate transfer stations, where waste is delivered and compressed onto tractor-
trailer containers for shipment to regional landfills.
Organic materials and infrastructure
Organic materials include yard debris, discarded food, and other wastes that come from plant
and animal sources. The laws and rules governing organics management are found primarily in
the Solid Waste Management—Reduction and Recycling statute107 and Solid Waste Handling
Standards rule.104
Food waste
Food and yard waste make up an estimated 28 percent of Washington’s municipal waste
stream. More than half of that (16 percent) was identified as food waste in the 2015–2016
Washington Statewide Waste Characterization Study.108 Estimates indicate that close to half of
all food disposed was edible at the time of disposal. National organizations, such as ReFED109
105 Chapter 173-351 WAC: http://app.leg.wa.gov/WAC/default.aspx?cite=173-351
106 You can find disposal amounts and other information on the Solid Waste and Recycling Data webpage at
https://ecology.wa.gov/Research-Data/Data-resources/Solid-waste-recycling-data.
107 Chapter 70A.205 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205.
108 https://apps.ecology.wa.gov/publications/SummaryPages/1607032.html
109 https://www.refed.com
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 46 August 2021
and Natural Resource Defense Council,110 estimate that up to 40 percent of all food grown is
never eaten. This not only wastes the food, but also the labor, energy, water, and fossil fuels
used to produce it.
These impacts led the Project Drawdown111 organization to identify food waste reduction as
the third most important action people can take to arrest and reverse climate change.
In 2019, Washington legislators passed a law that set a state goal to reduce food waste 50
percent by 2030, and required the creation of a plan to help achieve that goal.112 Ecology is
developing this plan with stakeholders and it will be delivered to the Legislature in October
2021.
Managing organic waste
Focusing on reducing the amount of organic material disposed results in social and
environmental benefits. For example, edible food can be diverted to hunger relief organizations
and inedible food can be used to create products, such as animal feed, soil amendments,
bioenergy, or biofuel.
Keeping organic wastes and materials out of landfills also helps reduce methane emissions. In
2002, the Legislature updated Solid Waste Management—Reduction and Recycling 113 with a
10-year goal to eliminate yard debris sent to landfills in areas with available and effective
alternatives. While an increasing number of alternatives exist, yard debris continues to be sent
to landfills at significant levels (6.7 percent of disposed municipal solid wastes or 308,154 tons
annually based on the 2015–2016 Washington Statewide Waste Characterization Study).
Many local governments have established programs to divert organic wastes and materials
from disposal, such as backyard composting and curbside collection that delivers the material
to commercial or municipal composting facilities. The focus of the curbside collection program
is primarily on single-family households, and is not feasible in every location due limited
composting facilities and lack of interest or need in some locales, such as rural areas that tend
to practice on-site management. Pilot programs to test organics collection at multi-family
properties reveal barriers including regular turnover of residents and increased amounts of
contamination that make organics collection at the properties problematic. We remain open to
alternative means to process organics in community conversion systems as well as increasing
feasibility of curbside collection programs.
Most commercial compost facilities in the state accept food waste because it supplies valuable
nitrogen and moisture to the composting process. Some of these facilities now accept
compostable packaging along with food waste. However, confusion over which facilities accept
compostable products and difficulty in identifying compostable products versus their non-
110 https://www.nrdc.org
111 https://www.drawdown.org
112 Food Waste Reduction, Chapter 70A.205.715 RCW:
https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205.715
113 Chapter 70A.205 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 47 August 2021
compostable plastic counterparts have led to contamination in the finished compost, making it
more difficult to sell the finished compost.
Due to concerns of apple maggot contamination in organics collected in areas of Washington
where the apple maggot is established, transporting those organics to areas that are free of the
apple maggot is now restricted unless WSDA treatment protocols are implemented. This has
caused an over-capacity issue for compost facilities in Western Washington, where it can be
difficult to site new compost facilities.
Two recent laws address challenges with composting. In 2019, the Plastic Product Degradability
law passed, requiring proper labeling on compostable and biodegradable products.114 In 2020,
the Legislature passed a law encouraging state and local agencies to purchase compost.115
More information about amount of materials composted at permitted compost facilities is
available on Ecology’s compost webpage.116
Currently, there are nine dairy farms using anaerobic digesters to manage manure, produce
energy, and recover fiber and nutrients. Roughly half of these farms also accept pre-consumer
food waste from food processors in order to boost energy recovery (no post-consumer food is
accepted at dairy digesters). There are also anaerobic digesters at 65 of the nearly 300 waste
water treatment plants in Washington that take food waste. There are multiple challenges with
increasing the amount of food waste processed at these digesters.
Development of biofuels and bio-generation of electricity from organic wastes and materials
has slowed due to competition with low fuel and electricity costs. Large industrial facilities have
also switched from wood-based fuels to natural gas due to low natural gas rates. This has led to
an excess of wood chips being sent to landfills.
Future directions: looking ahead
Washington state will continue to respond to challenges and opportunities in order to provide
innovative waste management solutions and move towards more sustainable materials
management.
Recycling
Our long-established and esteemed recycling programs are in flux. We need sustainable,
reliable, and responsible end-markets for our recyclable materials. Many believe recycling will
not be able to continue as it has been and that systemic changes are needed.
One common suggestion is an extended producer responsibility system for packaging and
printed paper, similar to what currently exists in Canada, Europe, and other regions. This type
114 Chapter 70A.455 RCW: Plastic Product Degradability:
https://app.leg.wa.gov/RCW/default.aspx?cite=70A.455&full=true
115 RCW 43.19A.120: Use of compost products in projects:
https://app.leg.wa.gov/RCW/default.aspx?cite=43.19A.120
116 https://ecology.wa.gov/compost
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 48 August 2021
of system can provide consistency and financing, and help address end-markets and growing
problems with plastics in our environment.
Others tout the new chemical recycling technologies, which are processes that break plastics
down into their original components to be remanufactured or used as fuel.
Whatever the best path forward, it is vital to increase engagement with those manufacturing
products that end up in our waste and recycling streams.
Evolution of waste
Waste composition is always changing. This change is referred to in the industry as the evolving
ton. Newspapers used to be a standard component of our waste and a valuable element of
recycling programs. Instead, now corrugated cardboard makes up an increasing percentage of
the feedstock. In addition, there is a larger component of cartons and plastic pouches that
protect our food, but cannot yet be effectively recycled at scale. How we manage these
materials to maximize their value from a life cycle or materials management cycle standpoint
must also continue to evolve.
Moving from a waste management hierarchy to a clean materials framework, as discussed in
the Center for Sustainable Infrastructure report,117 may provide a path forward. This new
framework recognizes that most of the environmental damage comes when materials are
extracted and processed into products—not when they become waste. The clean materials
framework aims to shrink the environmental footprint while creating new jobs.
Waste reduction
Recycling challenges have reinvigorated the need to focus on the highest waste management
hierarchy priority: waste reduction.
Most environmental impacts of the materials we use and manage as wastes are related to their
extraction and manufacturing. To really reduce waste and have the biggest environmental
benefit—including the reduction of greenhouse gasses—we need to look upstream at what and
how much we use, and then reduce our consumption.
One important area to reduce waste and associated climate impacts is in reducing the amount
of wasted food. Given the new state goal and other commitments, this should be a growing
focus of our collective work.
Opportunities for organics wastes
With the passage of The Climate Commitment Act 118 of 2021, the Legislature established clear
support for reducing the amount of greenhouse gases emitted in the state. Reducing landfill
disposal of organics and using composted organic products to sequester carbon are important
strategies identified in this law. Diverting organic wastes to animal feed, soil amendments, and
energy recovery can help the state reach greenhouse gas reduction goals.
117 https://www.sustaininfrastructure.org/clean-materials-2040-blueprint
118 http://lawfilesext.leg.wa.gov/biennium/2021-22/Pdf/Bills/Senate%20Passed%20Legislature/5126-
S2.PL.pdf?q=20210520133824
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 49 August 2021
While more organic waste and materials are collected in the state, demand for the finished
compost made from collected organics has not kept up with production. Reasons for this can
include the sometimes poor quality of the finished material, the cost of the finished compost,
and the technical issues associated with spreading the compost on fields. The end result is
overstock at some commercial compost facilities.
To reduce the overstock, in 2020 the Legislature amended the Recycled Product
Procurement 119 to add a qualified requirement for state and local governments to buy locally
produced compost. The recognition of the value of this material to sequester carbon may help
improve markets in the future. Issues around making and distributing compost in Washington
underscores why preventing organic waste generation is a top priority.
Ecology will continue to work with other state agencies, institutions of higher education, and
industry to identify ways to reduce generation of organic wastes and find ways to increase
beneficial management of these materials.
Disposal facilities
South-central Washington has a well-established transport system and significant landfill
capacity—enough for at least 40 years, at current estimates. Some areas of the state also have
increased interest in waste-to-energy facilities, though siting such facilities would be
challenging.
While Ecology strives for less waste overall, disposal facilities will be a critical element of
Washington's solid waste management system for the foreseeable future. Ensuring safe and
legal disposal remains a priority.
Solid waste system issues goals and actions
GOAL SWM 1: Sustainable mechanisms to finance recycling, diversion, and waste reduction
programs are identified and adopted. Tip fees better reflect full costs of managing the waste
system, including infrastructure needs and closure and long-term care of waste facilities.
Action SWM 1A: Continue to search for and promote sustainable mechanisms to
finance recycling, diversion, and waste reduction programs.
Actions SWM 1B: Share information about the costs and benefits of recycling, and
promote best management practices that service charges and tip fees reflect full costs
of managing the waste system.
GOAL SWM 2: Climate and other environmental impacts of materials management methods
are better understood through various tools, including life cycle assessments. The highest and
best use of materials are identified and promoted, prioritizing waste reduction and quality
recycling.
Action SWM 2A: Develop recommendations and establish goals based on key impact
assessments on the production, use, reuse, and end-of-life phases from waste
119 Chapter 43.19A RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=43.19A
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 50 August 2021
composition studies, EPA’s Waste Reduction Model120 (WARM), and other publicly
available life cycle models and tools.
Action SWM 2B: Encourage local governments to add goals in local plans that focus on
reducing life cycle impacts, reducing waste generation, and promoting responsible
recycling (appropriate to their jurisdiction), and to include waste generation metrics.
Action SWM 2C: Research and educate the public about the connection between
climate change, waste, and materials management.
GOAL SWM 3: Local governments have current solid and hazardous waste plans and grants that
support their waste management needs and work towards reducing waste and toxic chemicals,
in accordance with local resources. Grants are also provided to nonprofit organizations and
individuals to support outreach and education on waste reduction and management. Plans and
grants address equity and environmental justice issues.
Action SWM 3A: Provide technical assistance and funding to help local governments
add recycling contamination reduction and outreach elements to their local plans and
implement these elements.
Action SWM 3B: Provide planning and grant assistance to help local governments and
other grantees implement programs to manage their waste streams in ways that
support the waste management hierarchy and better meet resident needs. In providing
assistance, consider local challenges and opportunities, environmental justice issues,
and geographic and demographic differences in order to provide needed assistance
using equitable and inclusive approaches.
Action SWM 3C: Incorporate environmental justice and equity into grant programs. This
includes strategies such as requirements for accessibility in publications, providing
documents in languages represented in the community, and reducing economic and
organizational capacity barriers to applying for and managing grants.
Action SWM 3D: Update local planning guidelines and create a planning resource
library. Include guidance and tools related to environmental justice and equity, such as
demographic data and health disparities mapping tools, to focus efforts and inform
plans.
Solid waste, materials and infrastructure goals and actions
GOAL SWM 4: Washington residents and businesses generate less wastes, as measured per
capita.
Action SWM 4A: Highlight waste generation data, instead of the recycling rate, to
promote the need for waste reduction and focus on opportunity materials for reducing
waste.
Action SWM 4B: Collaborate with and support local jurisdictions, businesses, and
organizations to promote reuse and repair, and help shift to durable, reusable, and less
120 https://www.epa.gov/warm
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 51 August 2021
wasteful products. Incorporate reduction and reuse into procurement, policies, and
existing materials.
Action SWM 4C: Research to determine best strategies for addressing waste prevention
and reduction, analyzing policy solutions. Focus research on reuse, repair, durable
products, less wasteful alternatives, and the benefits of reduced consumption.
Action SWM 4D: Study and share models of successful reuse and sharing programs.
Identify and work to eliminate potential barriers, and create incentives for reuse and
sharing systems.
Action SWM 4E: Encourage and provide grants to projects that focus on reducing or
preventing waste and toxic chemicals, as able. Create model projects that others can
use.
GOAL SWM 5: Washington’s recycling system provides usable feedstocks for remanufacturing
from major sectors and waste streams.
Action SWM 5A: Work with trade organizations, solid waste collection companies, local
governments, and other parties to maintain and promote best management practices
for curbside and drop-box recycling. Design outcomes to yield the highest value within
the recycling stream and minimize contamination, cross-contamination, and other
system-loss issues.
Action SWM 5B: Implement the state contamination reduction and outreach plan 121 to
reduce recycling contamination, including guidelines for what and how materials should
be collected in recycling programs. Provide and keep current an online resource to share
contamination reduction best management practices from our partners.122
Action SWM 5C: Use existing research and support additional research to determine
best solutions for recycling system challenges. Research will focus on upstream
solutions, materials, collection, processing, emerging technologies, markets, and
communication, with emphasis on domestic processing. It will also evaluate and
promote collection models that provide the cleanest feedstocks.
Action SWM 5D: Examine and explore policy solutions for problematic recyclable
material streams—including multifamily, commercial, and construction debris—and
develop strategies and recommendations to address their specific issues.
GOAL SWM 6: The Northwest has a robust reuse and recycling infrastructure that includes
stable and varied end-markets.
Action SWM 6A: Operate the Recycling Development Center, with the Department of
Commerce and advisory board, to further markets and processing development for
121 Washington State Recycling Contamination Reduction and Outreach Plan (CROP):
https://apps.ecology.wa.gov/publications/SummaryPages/2007021.html
122 Recycling Contamination Reduction Best Management Practices & Resources Companion Guide:
https://apps.ecology.wa.gov/publications/SummaryPages/2007031.html
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 52 August 2021
recyclable materials, as well as waste reduction.123 Collaborate with other entities
conducting similar efforts, and coordinate with local and regional partners to expand
reach.
The Recycling Development Center will:
• Provide assistance to businesses to improve recycling markets.
• Promote use of recycled material feedstocks and recycled-content products.
• Conduct research, evaluate data, and analyze policies on recycling markets,
reuse, and waste reduction.
Action SWM 6B: Conduct service equity analyses of the following through The Recycling
Development Center:
• Residential recycling collection service across Washington state for single and
multifamily populations.
• Processing and remanufacturing of recyclable materials.
These analyses will support our work to direct efforts to those most in need and ensure
access to recycling benefits for as many Washington residents as possible.
GOAL SWM 7: Plastics in the waste stream are reduced. Plastics are managed systemically with
a priority on prevention, reduction, reuse, and recycling to minimize impacts to the
environment.
Action SWM 7A: Consult with industry and other interested parties to develop options
to minimize environmental impacts of plastic packaging and single-use plastic products.
Options will include roles for producers, and use findings from the legislatively required
study.124
Action SWM 7B: Engage in efforts to address plastic packaging and single-use plastics—
including improved labeling, recycled content and other policy solutions. Assess and
promote policies with the best impacts. Stay abreast of emerging technologies, life cycle
impacts, and marine debris. Coordinate with others to develop expertise on micro-
plastics.
Action SWM 7C: Support and provide technical assistance to help shift to the use of
durable, reusable products and away from a reliance on single-use products.
Action SWM 7D: Address and reduce plastics in the waste stream by focusing in part on
common items in marine debris, using data from the litter survey and other sources.
Action SWM 7E: Implement legislatively mandated plastic reduction initiatives and laws
including the plastic bag ban,125 recommendations developed from the plastic packaging
study,124 and other new laws as they are enacted.
123 Recycling Development Center, Chapter 70A.240 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.240
124 Plastic Packaging, Chapter 70A.520 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.520
125 Plastic Bags, Chapter 70A.530 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.530
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 53 August 2021
GOAL SWM 8: Effective design, policies and programs prevent and pick-up litter.
Action SWM 8A: Create an effective, inclusive, comprehensive, litter-prevention
campaign that is embraced by diverse stakeholders and residents. Target specific
behaviors and the most heavily littered materials in prevention efforts. Analyze policies
and design changes that could help reduce litter.
Action SWM 8B: Complete a litter survey, which may include an assessment of brands
or littered plastics connected to marine debris or other areas. Use litter survey data to
evaluate the litter tax based on what items are taxed and most frequently littered.
Based on this evaluation, recommend changes to the tax structure or its administration.
Action SWM 8C: Analyze the efficiency, effectiveness, equity, and safety of our litter
programs, and make appropriate updates and improvements.
Action SWM 8D: Lead a partnership of state, county, and local agencies to pick up litter
and illegal dumps. Oversee programs including the Ecology Youth Corps, Community
Litter Cleanup Program grants, and funding for litter programs at other state agencies.
Action SWM 8E: Look for opportunities to collaborate and share resources with NGOs
and community groups to advance litter prevention and pick-up efforts. Identify and
share actions that others can take to complement this work.
GOAL SWM 9: Sham recycling and improper disposal decrease.
Action SWM 9A: Communicate and work with local governments and recycling
businesses to uphold and enforce recycling laws, rules, and requirements. Explore
options for enforcement.
Action SWM 9B: Work with Washington Utilities and Transportation Commission 126 to
ensure Transporter Law provisions are implemented. Register transporters and enforce
as needed.
GOAL SWM 10: Solid waste handling facilities (permitted and permit-exempt) operate in
compliance with all regulatory criteria.
Action SWM 10A: Provide ongoing technical assistance—including landfill monitoring—
to facilities and jurisdictional health departments to help facilities comply with
regulations and minimize adverse environmental impacts.
Action SWM 10B: Interface with local governments, facility representatives, industry
associations, advocacy organizations, and other stakeholders to address widespread
barriers to facility compliance and strategies to overcome those barriers.
Action SWM 10C: Inspect select exempt recycling facilities to verify conditionally
exempt status and assess compliance. Seek ways to increase oversight of exempt
facilities, including requesting additional resources.
126 http://www.utc.wa.gov/Pages/default.aspx
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 54 August 2021
Action SWM 10D: Provide training options for jurisdictional health departments to
increase their expertise in regulating, permitting, and closing landfills. Assist landfill
operators to help landfills reach the end of the post-closure care period successfully and
transition to custodial care.
GOAL SWM 11: Landfills127 that have experienced uncontrolled releases of contaminants to the
environment will conduct corrective actions to remedy those releases.
Action SWM 11A: Use authority under the solid waste regulations and the Model Toxics
Control Act to implement cleanup actions at landfills that experienced uncontrolled
contaminant releases to the environment.
Action SWM 11B: Work to ensure that facilities in need of funding for cleanup actions
can pursue the available state grant program options.
GOAL SWM 12: State and local governments have increased understanding of solid waste-to-
energy and material recovery technologies.
Action SWM 12A: Stay abreast of solid waste energy and material recovery
technologies—such as chemical recycling, pyrolysis, gasification, and others—to provide
technical assistance on managing solid wastes in line with the state’s waste
management hierarchy.
Organic materials and infrastructure goals and actions
GOAL SWM 13: Food waste prevention and recovery efforts advance the state towards the goal
of 50 percent reduction of food waste by 2030. Work to reduce food waste focuses on
prevention first, followed by food rescue, then recovery, following the Washington organics
management hierarchy.128
Action SWM 13A: Implement the Use Food Well Washington Plan,129 prioritizing:
• Prevention: not making food waste in the first place.
• Food rescue: diverting safe, nutritious food to hunger relief organizations.
• Recovery: repurposing organic waste into animal feed, soil amendments to
improve soil health and sequester carbon, energy recovery, and fuels.
Action SWM 13B: Work with the Pacific Coast Collaborative West Coast Voluntary
Agreement 130 to reduce food waste from grocers along the west coast, adding other
sectors as able.
127 Landfills refers only to those operating under Chapters 173-304, 173-306, 173-350, and 173-351 WAC.
128 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Organic-materials#gallery
129 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Organic-materials/Food-waste-prevention/Food-
waste-plan
130 http://pacificcoastcollaborative.org/food-waste/
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 55 August 2021
Action SWM 13C: Promote and disseminate inclusive and accessible food waste
prevention tools and information to the public, other agencies, businesses, and local
governments. Provide tools to help people prevent, donate, and properly manage food
residuals, including on our food waste prevention webpage.131
Action SWM 13D: Work with hunger relief organizations, local and state agencies, and
other entities to increase the amount of safe and nutritious food rescued for human
consumption.
Action SWM 13E: Focus on food waste metrics, including tracking our baseline and
progress toward the 2030 goal, further identifying disposal of edible food versus
inedible food, and supporting efforts to develop and implement food donation tracking
metrics.
Action SWM 13F: Encourage the use of grants to fund food waste prevention and
rescue programs. Encourage these programs’ inclusion in local government solid waste
management plans.
GOAL SWM 14: Understanding and use of recycled organic products to amend soil, filter storm
and surface water, and sequester carbon, which helps diversify end-use markets.
Action SWM 14A: Coordinate with universities, extension programs, Washington State
Department of Agriculture, local governments, and other organizations to educate
farmers, landscapers, and residents on the beneficial impact of using organically derived
soil amendments. Support efforts to assess and report on the use of locally made
compost in state and local public works projects.
Action SWM 14B: Support universities, state and private storm and surface water
professionals, nonprofit organizations, and other entities to assess and promote the
ability of compost, biochar, and other recycled organics to reduce contaminants and
suspended solids in stormwater through various water filtration applications.
Action SWM 14C: Work with universities to research, document, and share information
on using recycled organics for soil carbon sequestration. Support and coordinate with
Washington State University to create a model to estimate carbon sequestration from
organic waste-derived soil amendments.
Action SWM 14D: Work with universities, the Washington State Department of
Commerce, and private industry to convert more organics (food and woody biomass)
into soil amendments, fuels, energy, and other applications.
Goal SWM 15: Organics processing infrastructure is sufficient and diversified.
Action SWM 15A: Support local government education on backyard composting and
other on-site organics management techniques. Promote these efforts’ inclusion in local
131 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Organic-materials/Food-waste-prevention/Food-
waste-plan
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 56 August 2021
government solid waste management plans and Ecology grant applications, including for
multi-family properties, underserved, and less resourced areas.
Action SWM 15B: Support scalable, localized systems for managing food scraps and yard
debris, including community-scale anaerobic digesters and other suitable organic
processing technologies.
Action SWM 15C: Support expansion of current organics processing technologies. Key
practices include integrating multiple technologies at composting facilities and using
anaerobic digestion at industrial sites and wastewater treatment facilities—with the
addition of food residuals for increased energy and fuel production.
Action SWM 15D: Evaluate and document barriers to broadening the use of
composting, anaerobic digesters, vermicomposting, black soldier flies, and other
technologies for managing manure and pre- and post-consumer food waste. Identify
and seek to implement solutions.
Action SWM 15E: Encourage the use of grant funds for diversified organics management
technologies that convert collected organics into beneficial end products.
GOAL SWM 16: Compost facilities operate well and produce clean, quality end products.
Action SWM 16A: Work with local governments, collection companies, composters, and
other stakeholders to provide technical assistance and promote education and other
actions to produce clean end products.
Action SWM 16B: Monitor issues associated with compostable packaging—including
PFAS 132—and support research as possible.
Action SWM 16C: Support research on organics management processing systems, tools,
methods, and mixtures that can help reduce or eliminate major odors or other
emissions at organics management facilities.
Action SWM 16D: Encourage assessments of contamination (plastic, metal, glass and
other non-organic materials) in collection carts and compost, in order to promote
changes to reduce contamination.
132 https://ecology.wa.gov/PFAS
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 57 August 2021
Section Three: Reducing Impacts of Materials and Products
Introduction
Reducing toxic threats
Toxic chemicals contained in products and used in industrial processes are released during
manufacture, use, or at end-of-life, impacting the environment and human health. Reducing
toxic chemical use helps protect the health and safety of workers, households, and
communities.
Designing processes and products that use fewer toxic chemicals means:
• Less dangerous waste generation.
• Less need for government regulation.
• A cleaner environment.
• Improved human health.
• Lower economic costs.
Ecology works with other state agencies, including the Department of Health and the
Department of Enterprise Services, to identify the most problematic chemicals and safer
alternatives, promote green chemistry innovation, and provide state and local agencies with
guidance for purchasing safer products.
Reducing climate and other impacts
Reducing the climate impacts of the materials and products we use and dispose of is another
way to reduce impacts. There are significant climate impacts from materials use. According to
an EPA study, approximately 42 percent of U.S. greenhouse gas emissions are associated with
the provision of goods and food. This includes the energy used to produce, process, transport,
and dispose of the food we eat and the goods we use.133
A consumption-based emissions inventory can calculate these impacts, and account for the
emissions associated over the life cycle of materials and products, including extraction,
production, distribution, use, and disposal.134 Carefully considering the types and amounts of
materials we use can help reduce impacts to our climate.
There is growing public demand for products and packaging that are less toxic, less wasteful,
more durable, or more recyclable. Life cycle analysis is the main way to assess the impacts of
material use at this time, though it is expensive and imperfect. For example, life cycle
assessments do not yet address all impacts, including marine debris or exposure to toxic
133 U.S. Environmental Protection Agency, "Opportunities to Reduce Greenhouse Gas Emissions through Materials
and Land Management Practices," September 2009, https://www.epa.gov/sites/production/files/documents/ghg-land-
materials-management.pdf, accessed on August 11, 2021.
134 Oregon leads the country in conducting Consumption Based Emissions Inventories:
https://www.oregon.gov/deq/mm/Pages/Consumption-based-GHG.aspx
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 58 August 2021
chemicals during use, and are best supplemented with additional information. Plastics, which
pose significant problems to oceans and other ecosystems, can have smaller carbon footprints
compared to other materials.135, 136 Finding the best path forward will be challenging.
As quoted in the Center for Sustainable Infrastructure’s Clean Materials report,137 “Arguably,
the two most urgent challenges are global climate change and the loading of toxic chemicals in
human bodies. Tackling these two urgent crises will require strategies that span the life cycle of
our products and materials.”
Authorizing framework: implementation and issues
Reducing toxicity of materials and products
In 2019, the Washington State Legislature passed groundbreaking legislation 138 that addresses
toxic chemicals in consumer products. Ecology implements this law through the Safer Products
for Washington 139 program.
With this new law, our state leads the nation in its authority, by rule, to regulate toxic chemical
classes in consumer products by implementing restrictions or reporting requirements when
viable safer alternatives exist. The law identified the first five priority chemical classes to
address:
• Organohalogen flame retardants and flame retardants identified in Chapter
70A.430.010 RCW.140
• Per- and polyfluoroalkyl substances (PFAS).
• Polychlorinated biphenyls (PCBs).
• Phenolic compounds.
• Phthalates.
The law also outlines a robust stakeholder advisory process, and requires consultation with
experts (including from the Department of Health) and regular reports to the Legislature.
The law establishes a repeating process that requires Ecology to:
1. Designate priority chemicals to address.
2. Identify priority products that contain these chemicals.
135 Oregon Department of Environmental Quality and U.S. EPA Environmentally Preferable Purchasing Program,
"Life Cycle Inventory of Packaging Options for Shipment of Retail Mail-Order Soft Goods," April 2004,
https://www.oregon.gov/deq/FilterDocs/LifeCycleInventory.pdf, accessed on August 24, 2021.
136 NPR article: https://www.npr.org/2019/07/09/735848489/plastic-has-a-big-carbon-footprint-but-that-isnt-the-
whole-story
137 https://www.sustaininfrastructure.org/clean-materials-2040-blueprint
138 Toxic Pollution, Chapter 70A.350 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.350
139 https://ecology.wa.gov/ToxicsInProducts
140 Children’s safe products, Chapter 70A.430 RCW: https://app.leg.wa.gov/rcw/default.aspx?cite=70A.430
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 59 August 2021
3. Decide whether or not to regulate chemical-product combinations by requiring
reporting or chemical restrictions.
4. Adopt rules to implement regulatory actions.
During implementation, Ecology must consider disproportionate impacts on historically
overburdened populations.
Ecology also oversees implementation of more than a dozen other consumer product laws and
rules enacted over the past several decades, which focus on specific product types and
chemicals known to be toxic to human health and the environment:
• The Packages Containing Metals and Toxic Chemicals law 141 of 1991 limits levels of lead,
mercury, cadmium, and hexavalent chromium used in product packaging. The law was
amended in 2018 to restrict the use of per- and polyfluoroalkyl substances (PFAS) in
specific applications of food packaging when safer alternatives are identified.
• The Mercury Education and Recovery Act142 of 2003 restricts mercury-containing
products such as thermometers, toys, novelties, thermostats, switches, and more.
• The Persistent, Bioaccumulative Toxics (PBT) rule 143 directed by Executive Order 04-01
in 2004 establishes criteria to prepare and implement Chemical Action Plans (CAPs) for
each PBT or group of PBTs.
o CAPs are comprehensive plans that identify, characterize, and evaluate uses and
releases of a specific chemical, and provide recommendations for actions to
protect human health and the environment.
o CAPs do not ban or regulate chemicals, but the recommendations in the plans
can lead to legislative or regulatory action.
o Ecology develops each CAP in collaboration with other agencies and experts,
including the Department of Health and representatives from businesses, local
government, human health, and environmental advocates.
• The Polybrominated Diphenyl Ethers (PBDE)—Flame Retardants law144 of 2007 bans
these chemicals from several uses in mattresses, electronic enclosures, and furniture.
• The Children’s Safe Product Act 145 of 2008 bans the use of lead, cadmium, and several
phthalates in children’s products.146 It also requires manufacturers of children’s
products sold in Washington to report if their product contains a chemical of high
141 Chapter 70A.220 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.222
142 Mercury, Chapter 70A.230 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.230
143 Chapter 173-333 WAC: https://apps.leg.wa.gov/wac/default.aspx?cite=173-333
144 Chapter 70A.405 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.405
145 https://ecology.wa.gov/CSPA
146 Chapter 70A.430 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.430
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 60 August 2021
concern to children 147 and why they use that chemical in the product. The law was
amended in 2016 to ban the use of specific flame retardants in children’s products and
residential upholstered furniture.
• The Replacement of Lead Wheel Weights law148 of 2009 bans lead from wheel weights.
• The Better Brakes law 149 of 2010 restricts the use of several heavy metals and asbestos
in automotive brake pads and shoes, and provides a schedule to phase out copper use in
these materials. 150
o Brake pads manufactured after 2021 must contain less than five percent copper
by weight.
o Brake pads manufactured after 2025 must contain less than 0.5 percent copper
by weight.
• The Bisphenol A (BPA)—Restrictions on Sale law 151 of 2010 bans this chemical from
bottles and cups for children, as well as sports bottles.
• The Stormwater Pollution—Coal Tar law152 of 2011 prohibits coal tar in pavement
products.
• The Recreational Water Vessels—Antifouling Paint law153 of 2011 initiated restrictions
on antifouling boat paint. The Legislature amended some restrictions in 2018 and again
in 2020 to allow more time to evaluate safer alternatives.
o Paint containing cybutryne will be prohibited starting in 2023.
o Paint containing copper will be prohibited starting in 2026 if Ecology determines
that safer and effective alternatives are feasible, reasonable, and readily
available by June 2024.
• The Firefighting Agents and Equipment—Toxic Chemical Use law154 of 2018 prohibited
PFAS (per- and polyfluorinated alkyl substances) in firefighting materials155 and
firefighting foam, and restricted PFAS in firefighting personal protective equipment.
While product-related laws target specific products and chemicals, implementation of these
laws can result in significant environmental improvements. For example, copper from brake
friction materials often finds its way from roads into waterbodies, harming fish and polluting
147 As defined by the Children’s Safe Products—Reporting Rule, Chapter 173-334 WAC:
https://apps.leg.wa.gov/WAC/default.aspx?cite=173-334
148 Chapter 70A.435 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.435
149 https://ecology.wa.gov/BetterBrakes
150 Brake Friction Material, Chapter 70A.340 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.340
151 Chapter 70A.335 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.335
152 Chapter 70A.440 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.440
153 Chapter 70A.445 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.445
154 Chapter 70A.400 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.400
155 https://ecology.wa.gov/ToxicsInFirefighting
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 61 August 2021
water. In urban areas, brake pads account for up to half of the copper entering our waterways,
and we estimate that 66 tons of copper per year enters the Puget Sound from brake pads.156
When the law is fully implemented in 2025, this source of copper pollution will be virtually
eliminated.
Testing and compliance
Ecology is responsible for ensuring compliance with many of the laws addressing toxic
chemicals in products. Ecology routinely tests products157 to determine if manufacturers are
complying with these regulations. To date, testing has focused on—and found—several classes
of toxic chemicals in consumer products, such as:
• PCBs, found in some consumer products such as pigments or inks.
• Toxic metals including lead, mercury, cadmium, antimony, and cobalt.
• Phthalates, used in plastics and fragrances.
• Parabens, used as preservatives in personal care products and cosmetics.
• Volatile organic chemicals including formaldehyde.
• Flame retardants including PBDEs and other substitutes.
The presence of a toxic chemical in a product does not necessarily mean that the product is
unsafe. However, some bans on specific uses of chemicals help protect human health, such as
BPA in baby bottles or heavy metals such as lead in packaging. When Ecology finds a restricted
or unreported chemical in a product, Ecology contacts the manufacturer and offers compliance
assistance. To date, all of the manufacturers Ecology has worked with have returned to
compliance.
Reducing other impacts of materials and products
The 1988 Waste Reduction statute 158 encourages “voluntary efforts to redesign industrial,
commercial, production, and other processes to result in the reduction or elimination of waste
by-products.” This definition of waste reduction includes all in-plant practices that reduce,
avoid, or eliminate waste generation or waste toxicity prior to generation.
The Solid Waste Management—Reduction and Recycling statute159 has included the
importance of reducing and managing waste from products since 1989. The law references
packaging and consumer products in the first line of its intent section. It also addresses
particular products that were troublesome at the time it was written (e.g., tires and vehicle
batteries) and references the need to study others (e.g., packaging, polystyrene, and diapers).
Concern for many of these products, and others, continues today. Actions to address these
concerns are increasing.
156 https://ecology.wa.gov/BetterBrakes
157 https://apps.ecology.wa.gov/ptdbreporting/
158 Chapter 70A.214 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.214
159 Chapter 70A.205 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 62 August 2021
Washington’s product stewardship programs
Product laws related to sustainable materials management include Washington state’s five
product stewardship programs—also known as extended producer responsibility programs.
These laws require producers to take responsibility for collection and recycling or safe disposal
of their products at end-of-life, many of which contain toxic chemicals.
• The E-Cycle Washington Program 160 established electronics recycling for computers,
TVs, laptops, monitors, tablets, e-readers and portable DVD players. The law passed in
2006, and the program has been in operation since January 1, 2009.161
• The LightRecycle Washington Program 162 established a product stewardship program for
lights containing mercury—a highly toxic metal—to keep the substance out of the
environment. The law passed in 2010 and the program began operations on January 1,
2015.163
• The Photovoltaic Module Stewardship and Takeback Program 164 of 2017 was the first of
its kind in the nation. It intended to get ahead of what will become a significant waste
stream and conserve the rare earth minerals in solar panels. Initially set to start in 2022,
the Legislature twice postponed program implementation, now set for 2024.
• The Safe Medication Return Program 165 of 2018 established the first statewide
manufacturer-funded take-back program for pharmaceuticals, overseen by the
Department of Health. The program began operation in November 2020. 166
• The Architectural Paint Stewardship Program167 of 2019 established Washington as the
ninth state to have a product stewardship law for paint. Starting in April 2021, the
PaintCare program 168 provides recycling or proper disposal of interior and exterior
architectural paints sold in five-gallon containers or smaller.
Bills have been previously introduced to the Legislature to establish additional product
stewardship programs for batteries, sharps, and plastic or other packaging, among others.
Environmentally preferable purchasing
Environmentally preferable purchasing169 (EPP) is the practice of procuring goods and services
that cause less harm to humans and the environment than competing goods and services that
160 https://ecology.wa.gov/ecycle
161 Electronic Product Recycling, Chapter 70A.500 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.500
162 https://www.lightrecycle.org
163 Mercury-Containing Lights—Proper Disposal, Chapter 70A.505 RCW:
https://app.leg.wa.gov/RCW/default.aspx?cite=70A.505
164 Chapter 70.510 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.510
165 https://www.doh.wa.gov/ForPublicHealthandHealthcareProviders/HealthcareProfessionsandFacilities/
SafeMedicationReturnProgram
166 Drug Take-Back Program, Chapter 69.48 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=69.48
167 Chapter 70A.515 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.515
168 https://www.paintcare.org/paintcare-states/washington/#/new-program-in-2021
169 https://ecology.wa.gov/Waste-Toxics/Reducing-recycling-waste/Environmentally-preferable-purchasing
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 63 August 2021
serve the same purpose. Washington has a broad mandate for EPP activities that includes laws
and executive orders directing state agencies to purchase environmentally preferred products.
• Recycled Product Procurement 170 has been in place since 1991. Its purpose is to
increase the purchase of products with recycled content by public agencies, such as
office supplies, landscaping products, and re-refined motor oil.
• The state law on Procurement of Goods and Services171 passed in 2012. It states that an
agency may consider best value criteria, including whether the bid considers human
health and environmental impacts, in determining the lowest responsive and
responsible bidder. In 2014, a section was added to the Procurement of Goods and
Services law that prohibits PCBs in goods the state purchases.172
• In 2020, Governor Inslee updated Executive Order 20-01, State Efficiency and
Environmental Performance 173 (SEEP) from the 2018 version, directing Ecology and the
Department of Enterprise Services to provide state agencies with guidance on EPP.
• Also in 2020, the Legislature passed the Use of Compost Products in Projects 174 law to
encourage the purchase and use of compost by state and local agencies, in recognition
of the importance of composting to waste and carbon reduction goals.
In addition to state directives, some local governments and other political subdivisions have
adopted EPP practices to help reduce their impact on Washington's environment and human
health.175
Sustainability of product packaging
Numerous local governments have banned single-use products including bags, straws, and
expanded polystyrene food service ware. State legislators are also introducing an increasing
number of bills banning or otherwise regulating these products.
• In 2020, a statewide plastic bag ban passed (Chapter 70A.530 RCW).176 It was to take
effect in January 2021, but the 2020 COVID-19 pandemic delayed implementation.
• In 2021, the Legislature passed Senate Bill 5022,177 which establishes post-consumer
recycled content for a number of plastics containers. This law also bans certain
170 Chapter 43.19A RCW: http://app.leg.wa.gov/RCW/default.aspx?cite=43.19A
171 Chapter 39.26 RCW: http://app.leg.wa.gov/RCW/default.aspx?cite=39.26
172 Products and products in packaging that does not contain polychlorinated biphenyls, Chapter 39.26.280 RCW:
https://app.leg.wa.gov/RCW/default.aspx?cite=39.26.280
173 https://www.governor.wa.gov/sites/default/files/exe_order/20-
01%20SEEP%20Executive%20Order%20%28tmp%29.pdf
174 RCW 43.19A.120: Use of compost products in projects:
https://app.leg.wa.gov/RCW/default.aspx?cite=43.19A.120
175 Visit Ecology’s website on Buying Green – Sustainable Purchasing for more information and for a list of
examples of sustainable procurement in local governments: https://ecology.wa.gov/EPP
176 Plastic Bags, Chapter 70A.530 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.530
177 https://app.leg.wa.gov/billsummary?BillNumber=5022&Year=2021&Initiative=false
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 64 August 2021
polystyrene products and requires food service businesses to affirm customers want
optional serviceware before providing disposable utensils or condiment packages.
Consumer product companies are increasingly focusing on sustainability or recyclability of
packaging or other products. Growing concern on single-use items, marine debris, and struggles
with the recycling system have led to the formation of multiple industry and advocacy
organizations and pledges.
Many companies have pledged to make their products and packaging recyclable or
compostable by 2030. This is similar to the goal called for in the Ellen MacArthur New Plastics
Economy.178 These goals are not yet possible to achieve in our current system due to lack of
recyclable material supply.
According to some life cycle analysis research, not all of these goals may provide for the best
environmental impact. For example, some compostable packaging can have a larger
environmental footprint than plastic packaging, due to the water and fuel needed to grow the
materials.179
Multiple company-funded organizations, such as The Recycling Partnership and the Sustainable
Packaging Coalition, are working to address recycling and other concerns. Ecology is engaged
with these and other groups and working towards a sustainable path forward.
Better-informed people make better purchasing choices, so Ecology provides information about
toxic chemicals in products and environmentally preferable purchasing. This includes sharing
results of product testing programs with policy makers, product manufacturers, businesses, and
residents.
Future directions: looking ahead
Public health concerns about everyday consumer products that contain toxic chemicals are
growing. Knowing when and how chemicals are used in products helps us better understand
where safer alternatives are needed. By sharing data from testing and reporting, Ecology
encourages manufacturers to find safer alternatives to toxic chemicals for their products and
processes.
Progress in this area will take strong partnerships between the state, private businesses,
industries, and other organizations. The growing demand for products that do not contain toxic
chemicals drives innovation in business and industry. This creates opportunity for Washington
businesses to lead the nation in reducing toxics in products and compete in tomorrow’s
marketplace.
Because of growing public concern about toxics in products and the slow process of the 2016
federal reform of the Toxic Substances Control Act,180 state legislators will likely continue to
178 https://www.ellenmacarthurfoundation.org/our-work/activities/new-plastics-economy
179 Oregon’s Popular Packaging Attributes webpage: https://www.oregon.gov/deq/mm/production/Pages/Materials-
Attributes.aspx
180 http://www2.epa.gov/laws-regulations/summary-toxic-substances-control-act
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 65 August 2021
address the need to take action. Some interest groups will likely continue to call for specific
restrictions on emerging contaminants or certain chemicals in products.
There may also be legislation proposed to promote economic incentives for green chemistry
innovation and market drivers that encourage safer alternatives’ development and adoption.
Ecology expects to see continued focus on efforts to reduce toxic chemicals that affect
vulnerable populations and sensitive environments.
Since other states and countries are continuing to expand product stewardship programs, it is
likely there will be more legislation introduced in Washington state. Laws for solar panels,
pharmaceuticals, and paint passed in 2017, 2018, and 2019, respectively. Other products being
discussed for stewardship programs include batteries, carpet, sharps, vaping products,
mattresses, carpet, household hazardous waste, packaging, and wind turbine blades. Not all are
in agreement that product stewardship programs are the best policy, especially for products
like packaging. Other policy ideas that address systemic needs are not forthcoming. Therefore,
both the number of stewardship bills introduced and support for these programs—including
from producers-- increases.
Interest in EPP is expanding, especially as a way to address toxic chemicals throughout the
supply chain. Implementing the SEEP Executive Order 181 may leverage state government
purchasing power to help make environmentally preferable and reusable products more
available or less expensive.
Public concern about non-recyclable packaging and single-use products will continue. Ecology
anticipates additional policy actions to reduce single-use items, especially those made of
plastic, as well as ongoing dialogues with product manufacturers to encourage better design,
including reusable and durable options.
Reducing impacts of materials and products goals and actions
GOAL RIMP 1: Safer products for a non-toxic, healthy, and prosperous Washington are
identified, available, and used by residents and businesses.
Action RIMP 1A: Identify at least five priority chemical classes and priority products that
are a significant source of, use, or contain chemicals from these classes every five years
according to Chapter 70A.350 RCW.182
Action RIMP 1B: Gather information about chemicals through collaboration with the
Department of Health, information requests to manufacturers, required disclosure, and
environmental monitoring.
181 https://www.commerce.wa.gov/growing-the-economy/energy/state-efficiency-and-environmental-performance-
seep/
182 Toxic pollution, Chapter 70A.350 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.350
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 66 August 2021
Action RIMP 1C: Promote use and development of safer alternatives, and adopt
necessary restrictions on priority chemicals in priority products when safer alternatives
are available.
Action RIMP 1D: Encourage the State Legislature and the federal government to
promote legislation that requires disclosure of ingredients in products and expands
chemical disclosure requirements under the Emergency Planning and Community Right
to Know Act,183 Toxic Release Inventory,184 Toxic Substance Control Act,185 and other
laws.
GOAL RIMP 2: Residential, commercial, and institutional sectors increasingly accept and use
environmentally preferable products and services.
Action RIMP 2A: In cooperation with the Department of Enterprise Services,186 increase
governmental agencies’ purchases of environmentally preferable products and services
through cooperation, executive order, policy, or law. Encourage policies that promote
the purchase of reusable, durable, recycled-content and safer products. Support the
creation of incentives or requirements for manufacturers bidding for state and local
contracts to disclose toxic ingredients.
Action RIMP 2B: Promote the use and benefits of environmentally responsible products
and services for public and private sectors, supporting and providing education and
outreach activities with partners across diverse demographic and geographic areas.
Action RIMP 2C: Support efforts to develop measurement and tracking systems for
green purchases.
Action RIMP 2D: Promote awareness and increase purchases of products with
independent third-party labels, certifications, and disclosures—such as EPA’s Safer
Choice 187 program. Ensure labels are effective, credible, and transparent. Advocate for
establishing the Safer Choice program in statute.
GOAL RIMP 3: New product stewardship programs increase collection, reuse, and recycling of
toxic or hard-to-handle products and packaging, and provide equitable access to services.
Action RIMP 3A: Track and strategically support product stewardship programs and
other producer-led initiatives for toxic or hard-to-handle products and packaging. This
will help advance:
• Sustainable financing for end-of-life management.
• Improved access and more accessible services.
• Increased collection rates.
183 https://ecology.wa.gov/EPCRA
184 https://ecology.wa.gov/TRI
185 http://www2.epa.gov/laws-regulations/summary-toxic-substances-control-act
186 http://des.wa.gov/Pages/default.aspx
187 http://www2.epa.gov/saferchoice
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 67 August 2021
• Incentives for improved product design.
Action RIMP 3B: Work with stakeholders to advance product stewardship programs that
use and complement existing collection and waste management infrastructure, cover
fair and reasonable costs, collect robust data, and provide inclusive, accessible outreach.
Action RIMP 3C: Explore ways to use product stewardship or other strategies to
incentivize manufacturers to reduce their products’ environmental impacts.
GOAL RIMP 4: Manufacturers increasingly design products and packaging to reduce climate and
other environmental impacts, which may include material reduction, recycled content,
durability, reusability, recyclability, and reduced toxicity.
Action RIMP 4A: Research and promote how best to reduce environmental impacts of
products and packaging, partnering with trade associations and manufacturers to
address design.
Action RIMP 4B: Monitor and participate in regional and national efforts to improve
labels, symbols, messages, environmental product declarations, and other claims
regarding the sustainability, recycling, or compostability of packaging and other
materials.
Action RIMP 4C: Maximize opportunities to engage with manufacturers and other
groups working on waste prevention, reuse, recycling and sustainability of products and
packaging.
Action RIMP 4D: Encourage manufacturers to complete self-evaluations on their own
products and processes, such as life cycle analyses, alternative assessments, or footprint
projects, and to make improvements.
GOAL RIMP 5: Manufacturers and other chemical users significantly reduce the presence of
toxic chemicals, including persistent, bioaccumulative toxics (PBTs), in products.
Action RIMP 5A: Use technical assistance, training, and incentives to encourage
manufacturers, businesses, and local government to adopt safer alternatives for priority
chemicals.
Action RIMP 5B: Advance green chemistry and responsible use of nanotechnology by
supporting the implementation of green chemistry principles and green engineering
principles.
Action RIMP 5C: Monitor implementation of the Frank R. Lautenberg Chemical Safety
for the 21st Century Act,188 Toxic Substances Control Act,189 and associated regulations.
Action RIMP 5D: Promote a “community of practice” for the emerging chemical hazard
assessment and alternatives assessment field to help manufacturers and other chemical
188 https://www.epa.gov/assessing-and-managing-chemicals-under-tsca/frank-r-lautenberg-chemical-safety-21st-
century-act
189 http://www2.epa.gov/laws-regulations/summary-toxic-substances-control-act
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 68 August 2021
users reduce unnecessary toxic chemicals in products and industrial processes, and
influence design of more sustainable products and processes.
Action RIMP 5E: Enforce regulations restricting toxic chemicals in products and
packaging laws. Update legislation as needed to address emerging threats.
GOAL RIMP 6: Protect air, water, and land resources to reduce the likelihood of contamination
from toxic pollution sources, especially in areas with environmental justice considerations.
Action RIMP 6A: Implement toxic reduction initiatives and environmental monitoring to
measure long-term trends related to chemicals of concern.
Action RIMP 6B: Ensure the agency’s toxic reduction strategy is adequately represented
and given priority in the Puget Sound Action agenda.190
Action RIMP 6C: Identify and implement actions to reduce PBTs and other toxic
chemicals or chemical classes through the Chemical Action Plan 191 (CAP) process. Within
the CAP process, research phthalate chemicals, write new CAPs, and work with
stakeholders to implement all CAP recommendations.
Action RIMP 6D: Update the Persistent Bioaccumulative Toxins (PBT) rule 192 to include
priority chemicals based on new science and information.
Action RIMP 6E: Work to secure funding—such as through the National Estuary
Program 193—for toxic chemical reduction activities in major water bodies, including
Puget Sound and the Columbia River Basin. Participate in the Columbia River Toxics
Workgroup.
190 http://www.psp.wa.gov/action_agenda_center.php
191 https://ecology.wa.gov/CAPs
192 Chapter 173-333 WAC: https://app.leg.wa.gov/wac/default.aspx?cite=173-333
193 http://water.epa.gov/type/oceb/nep/index.cfm#tabs-2
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 69 August 2021
Section Four: Measuring Progress
Introduction
The saying goes, “What gets measured, gets managed.” At all levels of government, officials use
data to evaluate the effectiveness of programs and initiatives. Data analysis helps determine
future directions, identify gaps, build budgets, and support environmental justice. Careful data
collection and analysis is vital for properly run programs.
Since 2004, the State Solid and Hazardous Waste Plan has included a measuring progress
initiative. The main intent of this section is to assess a path toward measuring progress on some
key aspects for achieving the plan vision, and make recommendations that support that path.
The secondary intent of this section is to support data for plan actions by identifying gaps and
providing supporting recommendations that would help to fill those gaps.
Most of the data that local government, private companies, and Ecology collect in the solid and
hazardous waste system is required in statute or rule. For example, a regulated solid waste
facility is required to annually report solid waste materials received to Ecology and its local
health department. Ecology uses data to report our performance to the Office of Financial
Management for budget development and other decision making, as well as in outreach and
publications.
You can find much of the data Ecology’s Solid Waste Management Program collects, including
data referenced in this plan, on the solid waste and recycling data194 webpage. Ecology’s
Hazardous Waste and Toxics Reduction Program collects, uses, and shares data as outlined in
this chapter of the plan.195 Efforts are currently underway to assess existing performance
measures and reporting methods, and develop more accurate and useful ways to incorporate
data-driven decision making into Ecology’s work, help set priorities, and adjust course as
needed.
Ecology and others rely on many outside datasets to accomplish goals, especially in the area of
environmental justice. For example, demographic data from the U.S. Census Bureau is analyzed
and summarized by the Office of Financial Management (OFM) and incorporated along with
other datasets into the Department of Health’s Environmental Health Disparities (EHD) map.196
Authorizing framework: implementation and issues
State law and rule requirements generally drive Ecology’s data collection and analysis.
Regulations often require tracking to help gauge performance and show that changes are
194 https://ecology.wa.gov/Research-Data/Data-resources/Solid-waste-recycling-data
195 We may collect, but do not share confidential business information about products or processes used by
manufacturers.
196https://www.doh.wa.gov/DataandStatisticalReports/WashingtonTrackingNetworkWTN/InformationbyLocation/
WashingtonEnvironmentalHealthDisparitiesMap
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 70 August 2021
working as intended. Other data drivers include program performance goals and individual
project needs.
The following are the most comprehensive mandates for data collection and reporting related
to hazardous and solid waste in Washington.
• The federal Emergency Planning and Community Right to Know Act197 requires
businesses that legally store or release chemicals to report releases to Ecology so they
can be included in a Toxic Release Inventory.198
• Under the Hazardous Waste Management law,199 Ecology uses automated data systems
to track amounts of dangerous waste generated each year and proper transport,
treatment, and disposal. Ecology uses such data to estimate dangerous waste
generation for the state.
• The Waste Reduction law 200 requires pollution prevention (P2) plans from facilities that
generate more than 2,640 pounds of dangerous waste per year or that are required to
report as part of the national Toxic Release Inventory. Ecology uses the data in the P2
plans to help facilities reduce their hazardous waste generation and toxic chemical use.
• The Solid Waste Management—Reduction and Recycling law 201 requires Ecology to
track and report the quantity of materials disposed and collected for recycling, as
reported by solid waste handling facilities statewide. The law also gives the state
authority to collect other solid waste collection and disposal data, including moderate
waste risk data. These data are used to determine solid waste generation and recovery
rates. As of 2019, Ecology is required to track food waste202 in order to measure
progress towards the statutory goal to reduce food waste 50 percent from 2015 levels
by 2030.
• The Waste Reduction, Recycling, and Litter Control Act203 provides funding for litter
pickup by Ecology Youth Corps,204 local governments, and some state agencies, among
many other activities. Amounts of litter picked up are tracked and reported. Litter
surveys are completed when funding allows, which has been infrequent.
197 https://www.epa.gov/epcra/what-epcra
198 https://ecology.wa.gov/TRI
199 Chapter 70A.300 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.300
200 Chapter 70A.214 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.214
201 Chapter 70A.205 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205
202 Food Waste Reduction, Chapter 70A.205.715: https://app.leg.wa.gov/rcw/default.aspx?cite=70A.205.715
203 Chapter 70A.200 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.200
204 https://ecology.wa.gov/EYC
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 71 August 2021
• The Children’s Safe Products Act205 requires manufacturers of children’s products sold in
Washington to report if their product contains a chemical of high concern to children.206
Manufacturers also must explain why they use the chemical in their products.
• The Brake Friction Material law207 (also known as the Better Brakes Law) restricts the
use of several heavy metals and asbestos in automotive brake pads and shoes.
Manufacturers are required to report concentrations of copper, nickel, zinc, and
antimony in brake materials sold in Washington.
Priorities for data collection are set in statute and rules, as outlined above. Establishing rules
that govern reporting under these laws requires public processes which provide an opportunity
for all interest groups to influence requirements, such as which facilities have to report and the
details of those reports.
Ecology and our partners, such as local government staff and industry representatives, want
additional, timelier, and more transparent waste data for our state. The types of data we can
collect are limited by constraints set in rules and statute, time lags for processing data, and
staffing resources to pursue data not required in rules.
Some data gaps that are key to measuring progress have no clear answer as of the writing of
this plan. For example, Ecology and partners would like to have more information about end
markets for recyclable materials. Multiple avenues have identified this issue, so far without a
satisfactory solution. Ecology would like to assess this issue over the coming plan period and
work with data providers to fill this and other data gaps. This may require new rules or laws.
The pressure is on at all levels of government to show meaningful results tied to environmental
impacts. As a result, data collection and analysis by Ecology and our partners is expanding and
evolving. Washington’s Legislature and Governor are highly interested in agency effectiveness
and use data to help set priorities. Ecology continues to look to such data as a tool in
determining levels of funding, staffing, and changes in program activities.
Future directions: looking ahead
Our partners—such as local governments, business and industry, non-governmental
organizations, and the public—are interested in the data Ecology collects. Some organizations
use the data to help set priorities, evaluate programs, and respond to new laws. Ecology will
need to continue to be responsive to stakeholders’ data needs as issues emerge and priorities
change. Ecology and our partners should explore the potential to address data gaps as new
legislation is developed.
There is growing demand for interactive and creative visual displays of data—for example, using
infographics, maps, and dashboards. There is also a trend toward using more data in public
205 Chapter 70A.430 RCW: https://app.leg.wa.gov/rcw/default.aspx?cite=70A.430
206 Defined by Children’s Safe Products—Reporting Rule, Chapter 173-334 WAC:
https://apps.leg.wa.gov/WAC/default.aspx?cite=173-334
207 Chapter 70A.340 RCW: https://app.leg.wa.gov/rcw/default.aspx?cite=70A.340
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 72 August 2021
outreach on social media channels, blogs, and websites. Ecology is using these avenues of
distribution and monitoring the need for changes.
In 2021, the Legislature passed the Senate Bill 5141,208 the Healthy Environment for All (HEAL)
Act, which establishes requirements and timelines for agencies to address environmental
justice, including:
• Create and use standard methods to develop, track and evaluate environmental justice
goals.
• Use the recently developed Washington State Department of Health mapping tools with
environmental health disparities data209 to inform efforts and measure long-term
reductions in disparities.
With increasing emphasis on showing results in a meaningful way and with more tools available
to choose from, there are opportunities for improved ways to measure progress. Ecology and
our partners need to think strategically about where to focus data collection and analysis
efforts, and how to improve data collection and address gaps.
Measuring progress goals and actions
GOAL DATA 1: Data informs efficiency, effectiveness, and environmental justice considerations
of materials and waste management and toxic chemical reduction.
Action DATA 1A: Evaluate how to maximize the effectiveness of toxic chemical
reduction efforts, using data in support of strategic outreach. Use positive case studies
to educate others and recognize successful programs.
Action DATA 1B: Analyze and share data on service distribution and environmental
effects to overburdened communities and areas with environmental justice
considerations.
Action DATA 1C: Improve dangerous waste and toxics reduction data integration to
increase staff effectiveness with technical assistance and compliance efforts.
Action DATA 1D: Use environmental justice mapping tools and design measurable goals
when addressing environmental justice.
GOAL DATA 2: State agencies, local governments, and audiences from affected communities
can make informed decisions to help reduce risks to human health and the environment from
toxic chemicals.
208 Engrossed Second Substitute Senate Bill 5141: http://lawfilesext.leg.wa.gov/biennium/2021-
22/Pdf/Bills/Session%20Laws/Senate/5141-S2.SL.pdf?q=20210702083739
209 Washington State Department of Health Environmental Health Disparities Map:
https://www.doh.wa.gov/DataandStatisticalReports/WashingtonTrackingNetworkWTN/InformationbyLocation/Was
hingtonEnvironmentalHealthDisparitiesMap
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 73 August 2021
Action DATA 2A: Develop measures to track changes in the amount of toxic chemicals in
products, focusing on products regulated under state law, such as:
• The “Better Brakes” law210 (Brake Friction Material).211
• The Children’s Safe Products Act212 (Children’s Safe Products).213
• Other applicable laws in which Ecology are testing products to determine
compliance.
Action DATA 2B: Share information about facility and company pollution releases and
toxic chemical reduction using our Toxic Release Inventory214 website and social media.
GOAL DATA 3: Data on the environmental impacts of materials—from extraction, manufacture,
purchase, and discard—are tracked and used to inform decisions.
Action DATA 3A: Complete a state waste characterization study every four years,
including sector analyses for construction and demolition debris, moderate risk waste,
organics (including food waste), products, and packaging. Coordinate this study with
waste characterization studies done at the local level.
Action DATA 3B: Characterize recyclables and contamination by conducting sampling
studies on recyclable materials and organic materials. Coordinate with studies done at
the local level.
Action DATA 3C: Use waste composition studies, EPA WARM,215 and other publicly
available life cycle models to assess key impacts in the extraction, production, use,
reuse, and end-of-life phases.
Action DATA 3D: Conduct a consumption-based emissions inventory for Washington
state.
Action DATA 3E: Assess and improve the efficiency and effectiveness of waste and
materials data to best support existing programs, new laws, and emerging issues.
Transition to online reporting for all solid waste handling facilities. Pursue updated
reporting requirements in order to fill data gaps and collect more thorough and timely
data.
Action DATA 3F: Collect data regarding where and how recyclable material is used or
recycled. This action will be led by the Recycling Development Center, in cooperation
with partners.
210 https://ecology.wa.gov/BetterBrakes
211 Brake Friction Material, Chapter 70A.340 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.340
212 https://ecology.wa.gov/CSPA
213 Chapter 70A.430 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.430
214 https://ecology.wa.gov/TRI
215 https://www.epa.gov/warm
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 74 August 2021
Section Five: Providing Outreach and Information
Introduction
The success of this plan relies in part on providing effective outreach and needed information
to stakeholders on solid and hazardous waste and materials management issues.
Outreach helps keep stakeholders informed of rules, laws, programs, data, research, and other
developments. It also informs and encourages desired actions, such as choosing safer chemicals
and products, or recycling correctly.
Selecting the right audience and conducting effective outreach is an ever-changing practice. In
this age of social media and digital communication, there are a growing number of ways to
share information, but also increased competition for everyone’s attention. Relying on digital
forms of communication—such as webinars, social media, and online meetings—can also
create barriers to participation for populations with limited access to technology and internet.
Ecology is committed to ensuring that diverse audiences have meaningful access to services,
information, and input on policy directions. This means routinely evaluating who the intended
audience is then planning for inclusive engagement that addresses the languages, cultures,
literacy, abilities, and other characteristics of the audience.
Despite the growing demand for outreach and information, funding is limited and typically ebbs
and flows. During times of economic hardship—such as the recession of 2008, or more recently,
the COVID-19 pandemic—funds for agency-sponsored education and outreach are often cut by
the Legislature. A recent renewal of outreach efforts, such as the Recycle Right 216 campaign,
were stalled or canceled due to budget impacts from the COVID-19 pandemic.
Despite these challenges, Ecology is committed to creating relevant, effective, and innovative
outreach on solid and hazardous waste and materials management issues. We also want to
ensure our engagement and outreach work reflects a commitment to environmental justice
and upholds Title VI Civil Rights compliance obligations.
Authorizing framework: implementation and issues
Many statutes acknowledge the importance of outreach for both solid and hazardous waste
and materials.
• Solid Waste Management—Reduction and Recycling 217 calls for both state and local
government to provide education. This should address “the need to reduce, source
separate, and recycle solid waste,” as well as to “promote the concepts of waste
reduction and recycling.” The statute also establishes the 1-800-Recycle information
line,218 a directory to help guide people to recycling locations. In 2019, a requirement
was added for state and local governments to help reduce contamination in the
216 https://ecology.wa.gov/recycleright
217 Chapter 70A.205 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205
218 https://1800recycle.wa.gov
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 75 August 2021
recycling stream by creating and implementing Contamination Reduction and Outreach
Plans (CROPs).
• The Waste Reduction, Recycling, and Model Litter Control Act 219 calls for increasing
public awareness of waste reduction and recycling participation needs. This statute also
establishes a grant program 220 for governments and nonprofit organizations to educate
the public about litter control, waste reduction, recycling, and composting.
• The Hazardous Waste Management statute 221 requires local governments to have a plan
for providing “ongoing public involvement and public education in regard to the
management of moderate-risk waste.” Education addresses risks from improper use and
disposal, methods of proper handling and disposal, and ways to reduce waste.
• The Model Toxics Control Act222 addresses hazardous waste cleanups by allocating grant
funding for local governments to provide outreach (and other programs) included in
their plans. This act also provides grant funds for non-governmental groups to deliver
outreach and education.
• The Waste Reduction statute223 establishes an office of waste reduction to encourage
reducing wastes and use of hazardous substances, and creates school awards for waste
reduction and recycling programs at schools. Both of these activities were curtailed for
many years due to budget reductions, though the school awards program was restored
in 2020.
• The product stewardship laws for electronics,224 mercury-containing lights,225 and
paint 226 include outreach requirements for producers and, to varying degrees, for
Ecology. As part of these extended producer responsibility programs, producers must
fund outreach.
• Title VI of the Civil Rights Act of 1964 prohibits discrimination based on race, color, and
national origin, including limited English proficiency. Ecology’s Performance Partnership
Agreement with EPA addresses the agency’s commitment to environmental justice and
Title VI.
Future directions: looking ahead
The complexity and variety of solid and hazardous waste and materials continues to increase;
therefore, communication needs continue to grow as well. Efforts to reduce waste and toxic
219 Chapter 70A.200 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.200
220 Waste Reduction and Recycling Education Grants: https://ecology.wa.gov/WRRED
221 Chapter 70A.300 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.300
222 Chapter 70A.305 RCW: https://app.leg.wa.gov/rcw/default.aspx?cite=70A.305
223 Chapter 70A.214 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.214
224 Electronic Product Recycling, Chapter 70A.500 RCW: https://app.leg.wa.gov/RCW/default.aspx?cite=70A.500
225 Mercury-Containing Lights—Proper Disposal, Chapter 70A.505 RCW:
https://app.leg.wa.gov/RCW/default.aspx?cite=70A.505
226 Architectural Paint Stewardship Program, Chapter 70A.515 RCW:
https://app.leg.wa.gov/RCW/default.aspx?cite=70A.515
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 76 August 2021
chemicals and encourage reuse and repair require clear, culturally relevant, and effective
communication to promote changes in behaviors.
Public concern about the use of toxic chemicals continues to grow; more people want to know
risks and alternatives to limit exposure to toxic chemicals in their environment and in products.
Outreach work in this area is needed. Growing opportunities and demand for digital outreach,
including more webinars and social media, are areas to explore.
Finding creative ways to address ongoing outreach is needed, including partnerships with
service providers and producers, among others. Outreach techniques, such as community-
based social marketing, will become more important—especially given the state’s increasing
population growth overall.
Further, Washington’s population of residents who do not speak English as their primary
language is one of the largest and fastest growing in the United States. There is increasing need
to design culturally effective communication strategies, and evaluate and strengthen our public
outreach activities to reach diverse audiences. Translation and co-creation with a culturally and
linguistically diverse set of partners are vital.
Providing outreach and information goals and actions
GOAL INFO 1: The majority of regulated businesses understand how to comply with the
dangerous waste regulations 227 and why it is important to implement their Pollution Prevention
plans. They understand that waste must be addressed during the design phase—not at the end-
of-life phase—and, when possible, reduce waste before it is created.
Action INFO 1A: Deliver industry-specific information on the dangerous waste
regulations, compliance, and implementing Pollution Prevention (P2) plans228 using
Ecology’s website and other means.
Action INFO 1B: Conduct dangerous waste outreach and online education, including
workshops at Ecology’s regional offices.
Action INFO 1C: Develop a communication strategy that inspires businesses to address
the social and economic benefits of environmental compliance, pollution prevention,
and sustainable consumption. This strategy will take into consideration community-
based social marketing methods and will consider incentives to encourage behavior
change.
GOAL INFO 2: Small businesses understand how to safely handle hazardous substances and
waste.
Action INFO 2A: Identify gaps and develop a comprehensive small business outreach
program for state and local jurisdictions, as well as other small business programs that
can coordinate with local government outreach programs. Consider how best to work
227 Chapter 173-303 WAC: https://app.leg.wa.gov/WAC/default.aspx?cite=173-303
228 https://ecology.wa.gov/P2Plan
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 77 August 2021
with vendors and others to help distribute this information. Translate small business
outreach materials to other languages as appropriate.
Action INFO 2B: Publicize chemical hazard assessment information and promote the use
of EPA’s Safer Choice program in Shoptalk229 and other channels, such as the Safer
Alternatives to Toxic Chemicals 230 website.
GOAL INFO 3: The public and other interested parties have access to reliable information about
toxic chemicals in products, including how to avoid and properly dispose of them.
Action INFO 3A: Provide product-testing data on our website for enhanced public access
to information for interested parties, including government agencies and tribes.
Action INFO 3B: Provide information about toxics in products, safer alternatives,
recycling options, and proper disposal on our website. Partner with local governments,
service providers, and other public health information.
Action INFO 3C: Encourage manufacturers to disclose ingredients and use labeling to
promote the public’s right-to-know what is in consumer products.
Action INFO 3D: Seek grant funds and promote their use to educate students, educators
(preschool through college), and the public on less toxic products and related topics.
GOAL INFO 4: Communication strategies, outreach materials, and public engagement activities
are inclusive, accessible, and in compliance with Title VI of the Civil Rights Act, and aligned with
Washington State Environmental Justice Task Force recommendations.231
Action INFO 4A: Evaluate and strengthen outreach activities to ensure diverse
audiences have meaningful access to services, information, and input on policy
directions. Use Washington State Environmental Justice Task Force recommendations,
including language-specific and culturally appropriate communication strategies and
methods in outreach and public involvement efforts.
Action INFO 4B: Create protocols and resources to help ensure outreach and
information is inclusive, accessible, and effective. Evaluate and address potential
barriers to meaningful access and for compliance with the Title VI procedural
checklist.232 Encourage partners and other organizations to do the same.
GOAL INFO 5: Positive educational messages on reducing food waste, reducing contamination
in collected organic materials, and the benefits of using compost and other recycled organic
products prompt Washington residents and businesses to take action or change behavior.
229 https://ecology.wa.gov/Shoptalk
230 https://ecology.wa.gov/SaferAlternatives
231 Health Equity Council, "Environmental Justice Task Force Recommendations for Prioritizing EJ in Washington
State Government," Fall 2020
https://healthequity.wa.gov/Portals/9/Doc/Publications/Reports/EJTF%20Report_FINAL(1).pdf, accessed August
11, 2021.
232 Title VI of the Civil Rights Act procedural checklist: https://www.epa.gov/sites/production/files/2020-
02/documents/procedural_safeguards_checklist_for_recipients_2020.01.pdf
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 78 August 2021
Action INFO 5A: Promote and disseminate effective tools and educational messages
related to reducing wasted food to the public, other agencies, businesses, and local
governments.
Action INFO 5B: Work with composters, and other stakeholders to exchange
information on the use and benefits of recycled organic products and provide guidance
on purchasing compost. Share messages with local governments as well as Washington
State University Extension offices and others to educate farmers, landscapers, and
residents.
Action INFO 5C: Work with local governments, collection companies, composters, and
other stakeholders to share cooperatively developed educational messages related to
reducing contamination in collection organics.
GOAL INFO 6: Effective messaging that promotes reduced consumption, waste reduction,
environmentally preferred purchasing, proper recycling, and litter prevention is in place and
complements local, regional, and national efforts.
Action INFO 6A: Develop and share information about waste reduction, consumption,
and the connection between waste, materials, and climate.
Action INFO 6B: Promote the use and benefits of environmentally responsible products
and services for public and private sectors, in coordination with partners. This will
include products with credible transparent independent third-party labels, certifications,
and disclosures.
Action INFO 6C: Provide outreach and information to the public, local governments and
other entities about reducing contamination and implementing best recycling
management practices to improve quality of materials.
Action INFO 6D: Conduct a multifaceted litter-prevention campaign using social
marketing techniques, targeting most heavily littered materials and plastics connected
to marine debris.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 79 August 2021
Glossary and Acronyms
This glossary is intended to provide definitions for terms and acronyms that may be unfamiliar.
Other more common terms in the solid or hazardous waste arenas (such as waste reduction,
recycling, solid waste, hazardous waste, etc.) are not included in this glossary, but definitions
may be found in the solid and hazardous waste laws, RCW 70A.205.015 233 and RCW
70A.300.010.234
AD / Anaerobic Digestion
The process of using bacteria to break down organic wastes in a low oxygen environment,
resulting in a biogas rich in methane as well as liquid and solid residues.
Alternatives Assessments
A set of tools that manufacturers, product designers, businesses, governments, and other
interested parties can use to make better, more informed decisions about the use of toxic
chemicals in their products or processes.
Biochar
A charcoal-like substance produced by the thermal conversion (pyrolysis) of organic matter
(including woody debris, agricultural by-products, and manure/bedding) in an oxygen starved
chamber. Biochar serves many purposes including sequestering carbon, improving soil quality
and moisture retention, and effectively treating water through filtration.
Bioenergy and Biofuels
A renewable energy or fuel source made from biomass, including agricultural crops or residues,
wood wastes and residues, animal wastes, and other waste materials.
Biomass
Recently living organisms or their metabolic by-products. Biomass is available on a renewable
basis (as opposed to fossil fuels, which are derived from long-dead biological material). Biomass
can be derived from dedicated energy crops and trees, agricultural food and feed crops,
agricultural crop wastes and residues, wood wastes and residues, aquatic plants, animal wastes,
municipal wastes, and other waste materials.
Chemical Recycling
Any of a broad range of processes, including pyrolysis and gasification, that break down
recovered plastics to the molecular level for use in oils, waxes, new polymers and other
products. Chemical recycling is sometimes called “advanced recycling.”
233 https://app.leg.wa.gov/RCW/default.aspx?cite=70A.205.015
234 https://app.leg.wa.gov/rcw/default.aspx?cite=70A.300.010
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 80 August 2021
Commingled or Single-Stream Recycling
Mixing recyclable materials for the purposes of efficient collection. Commingled recycling
collection systems usually involve a wheeled cart with a lid that ranges from 32–90 gallons in
capacity. Single-stream recycling is one type of a commingled collection system in which all
recyclable materials go in one container at the curb.
Consumption
The use of a resource, product or material. In the life cycle of a product, consumption typically
refers to the stage where something is acquired and used, following the production stage and
prior to end of life.
CBEI / Consumption-Based Emissions Inventory
An estimation of all of the greenhouse gas emissions associated with producing, transporting,
using, and disposing of goods and services consumed by a jurisdiction in a given time period,
wherever in the world those emissions are produced. Consumption-based emissions occur in
other states or nations and are not included in the sector-based emissions inventory.
Corrective Action
A process to guide the cleanup of unauthorized releases at dangerous waste management
facilities.
Dangerous Waste
Washington state law uses the term dangerous waste while federal law uses the term
hazardous waste. Washington’s definition of dangerous waste includes some wastes that are
not included in the federal definition (for example, solid corrosive dangerous waste, listed PCB
waste).
Dangerous Waste Regulations
These regulate dangerous waste in Washington state under WAC 173-303. They are based on
the federal Resource Conservation and Recovery Act (RCRA). The Department of Ecology
implements and enforces the dangerous waste regulations.
Disparities
Negative differences that do not imply unfairness; different than inequities, which are
avoidable differences that result from a lack of fairness or justice.
Diversion
Waste diverted from landfills, which includes materials reused and burned for energy in
addition to those that are recycled.
E-Cycle Washington
Washington’s extended producer responsibility program for computers, monitors, laptops,
tablet computers, televisions, portable DVD players, and e-readers.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 81 August 2021
End-of-Life
The point at which a product or material is no longer useful to the person possessing it and is
discarded for disposal or recycling.
Environmental Justice
The fair treatment and meaningful involvement of all people regardless of race, color, national
origin, or income with respect to the development, implementation, and enforcement of
environmental laws, rules, and policies. Environmental justice includes addressing
disproportionate environmental and health impacts in all laws, rules, and policies with
environmental impacts by prioritizing vulnerable populations and overburdened communities,
the equitable distribution of resources and benefits, and eliminating harm.
EPA / Environmental Protection Agency
The federal agency that leads the nation’s environmental science, research, education, and
assessment efforts. Created in 1970, EPA’s mission is to protect human health and the
environment.
EPP / Environmentally Preferable Purchasing
Also known as green or sustainable purchasing, this is the procurement of products or services
that have lesser or reduced negative effect or increased positive to human health and the
environment when compared with competing products or services that serve the same
purpose. The comparison may consider raw materials acquisition, production, manufacturing,
packaging, distribution, durability, operation, maintenance, or disposal. This term includes low
or non-toxic, durable, reusable, recyclable, and recycled (including compost) products or
services, as well as those that conserve energy or natural resources.
EPR / Extended Producer Responsibility
Also used interchangeably with the term Product Stewardship. EPR is a mandatory type of
product stewardship that includes, at a minimum, the requirement that the manufacturer's
responsibility for its product extends to post-consumer management of that product and its
packaging.
Equality
Refers to everyone having the same treatment without accounting for differing needs or
circumstances.
Equity
Equity has a focus on eliminating barriers that have prevented the full participation of
historically and currently oppressed groups. Equity is distinct from equality.
Feedstock
Materials needed to produce a product in a manufacturing or other process, including recycling,
composting and other waste processing activities. Feedstocks can be virgin raw (new) materials
or secondary (recovered or recycled) materials from the same or another process.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 82 August 2021
Green Chemistry
The invention, design, and application of chemical products and processes to reduce or to
eliminate the use and generation of hazardous substances.
Hazardous Waste
A waste with any of the following properties that make it dangerous or potentially harmful to
human health or the environment: ignitable, corrosive, reactive, toxic. Hazardous waste takes
many physical forms and may be solid, semi-solid, liquid, or even contained gases. Washington
state uses the term dangerous waste to include some wastes that are not in the federal
definition of hazardous waste (for example, solid corrosive dangerous waste, listed PCB waste).
Hazardous Substances
Hazardous waste and materials, including toxic chemicals.
Highest and Best Use
The use of a material which maximizes energy and natural resource savings while minimizing
environmental emissions, risk, and damage to human health and the environment.
HHW / Household Hazardous Waste
Household products that contain corrosive, toxic, ignitable, or reactive ingredients. This
includes any waste that exhibits the properties of dangerous waste, but is exempt from the
Washington State Dangerous Waste Regulations because it is generated by households.
HWTR / Hazardous Waste & Toxics Reduction
The Hazardous Waste & Toxics Reduction Program of the Washington State Department of
Ecology.
Independent Third-Party Certifications
Third-party certification means an independent organization has reviewed the claims made for
a product or process and independently determined compliance with specific standards.
Inequity
An avoidable lack of fairness or justice. Inequity describes differences that result from a lack of
access to opportunities and resources.
LQG / Large Quantity Generator
A facility that generates 2,200 pounds or more (or more than 2.2 pounds of certain types of
wastes) of dangerous waste per month.
LightRecycle Washington
Washington’s extended producer responsibility program for mercury-containing lights,
including fluorescent tubes, compact fluorescent lights, and high-intensity discharge lights.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 83 August 2021
Life Cycle
Consecutive and interlinked stages of a product or service system, from the extraction of
resources to the final disposal.
LCA / Life Cycle Assessment (or Analysis)
A systematic process to assess the environmental aspects and potential environmental impacts
associated with products, processes, or services, through production, usage, and disposal.
LSWFA /Local Solid Waste Financial Assistance
Ecology grants that help local governments develop and implement their hazardous and solid
waste management plans and provide solid waste enforcement. These grants are awarded once
each biennium
Marine Debris
Man-made waste that has been accidently or intentionally released into a storm drain, lake,
ocean, or other waterway. Marine debris is often classified as land based or ocean based;
estimates are that up to 80 percent of marine debris comes from land-based sources.
Materials
The substance or substances of which a thing is made or composed. The full range of materials
that come from and return to the Earth such as wood, minerals, fuels, chemicals, agricultural
plants and animals, soil, and rock.
Materials Management
A systemic approach to using and reusing materials more productively over their entire life
cycle. Materials management is focused on knowing and reducing the life cycle impacts across
the supply chain; using less material inputs (reduce, reuse, recycle); and using less toxic and
more renewable materials.
MRF / Material Recovery Facility
A facility that collects, compacts, repackages, sorts, or processes for transport recyclable
materials collected from curbside and other programs, for marketing to secondary processors,
recyclers, or end-users.
MQG / Medium Quantity Generators
A facility that generates between 220 pounds and 2,200 pounds of dangerous waste per month.
MRW / Moderate-Risk Waste
The combined hazardous waste stream made up of small quantity generator (SQG) waste and
household hazardous waste (HHW). This term is unique to Washington state.
Organics (Organic Materials)
Substances and products of biological origin that have the potential to be returned to the soil,
turned into biofuels, bioenergy, or other products. Organic materials include landscaping and
yard waste, food waste, manures, crop residues, wood, soiled/low-grade paper, and biosolids.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 84 August 2021
Overburdened
Used to describe communities and populations that experience disproportionate
environmental harms and risks due to exposures, greater vulnerability to environmental
hazards, or cumulative impacts from multiple stressors.
PaintCare
Washington’s extended producer responsibility program for architectural paints, primers,
stains, sealers, and clear coatings such as shellac and varnish.
P2 / Pollution Prevention
The use of processes or practices that reduce or eliminate the use of hazardous substances and
the generation of wastes at the source.
PBTs / Persistent Bioaccumulative Toxics
Persistent, bioaccumulative toxics (PBTs) are a distinct group of chemicals that threaten the
health of people and the environment. They remain in the environment for a long time without
breaking down (persistent); build up in the bodies of people and animals (bioaccumulate); and
have toxic effects on people, wildlife, and fish (toxic). Examples of PBTs include methylmercury,
PCBs, DDT, and dioxin.
PCBs / Polychlorinated Biphenyls
PCBs are a group of 209 manmade compounds. Historically, PCBs were mostly used in electrical
equipment, but there were other uses of PCBs such as plasticizers, wax and pesticide extenders,
and lubricants. PCBs build up in the environment and are known to cause cancer in animals.
Although federal law banned the manufacture of PCBs since 1977 and restricted some uses of
PCBs, there is still inadvertent production of PCBs during manufacturing or in certain cases,
they may be intentionally added below regulated levels.
PPG / Public Participation Grant
Ecology grants that provide funding to citizen groups and not-for-profit public interest
organizations to provide public involvement in monitoring the cleanup of contaminated sites
and prevent pollution by reducing or eliminating waste at the source.
Product
Something made or created by human or mechanical effort or by a natural process.
Product Stewardship
A system where those who produce, sell, use, or dispose of a product assume responsibility for
the product’s environmental, health, social, and economic costs throughout the product’s life
cycle. The producer has the greatest ability to minimize adverse impacts, but other
stakeholders share responsibility. Product stewardship can be either voluntary or required by
law. Extended producer responsibility is a form of mandatory product stewardship.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 85 August 2021
RCRA / Resource Conservation and Recovery Act
The federal law passed in 1976 that set standards for managing hazardous wastes and
encouraging recycling over disposal. RCRA also includes the federal standards for solid waste
landfills.
Recovery
Material that is diverted from the solid waste stream for the intended purpose of recycling,
composting, burning source-separated materials for energy, anaerobic digestion, land
application, and other beneficial uses.
Residual Contamination
Disposed materials that are culled from or leftover from the solid waste sorting and packaging
process. Includes non-recyclable contaminants, non-program material, out-throws, and
incorrectly sorted recyclable material.
Reuse
The use of a product or component of municipal solid waste in its original form more than once.
Sham Recycling
The collection of materials under false or illegal claims for the perceived purpose of recycling
where the materials are instead disposed or indefinitely stockpiled rather than legitimately
recycled.
SQG / Small Quantity Generator
A business, organization, industrial facility, or other type of establishment that creates 220
pounds or less of dangerous waste per month. The term conditionally exempt small quantity
generator (CESQG) can also be used. Dangerous waste generated by an SQG is exempt from the
dangerous waste regulations if certain conditions are met.
Solid Waste
As written in statute, solid waste means “all putrescible and nonputrescible solid and semisolid
wastes including, but not limited to, garbage, rubbish, ashes, industrial wastes, swill, sewage
sludge, demolition and construction wastes, abandoned vehicles or parts thereof, and
recyclable materials.”
SWM / Solid Waste Management
The Solid Waste Management program of the Washington State Department of Ecology.
Formerly known as the Waste 2 Resources Program and the Solid Waste & Financial Assistance
Program.
Source Reduction
The elimination of waste before it is created by designing, manufacturing, purchasing, or using
materials in ways that reduce the amount or toxicity of what is thrown away. Often used
similarly to waste reduction and waste prevention.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 86 August 2021
SMM / Sustainable Materials Management
The use and reuse of materials in the most productive and sustainable way across their entire
life cycle. SMM conserves resources, reduces waste, reduces toxic chemicals, slows climate
change, minimizes the environmental impacts of the materials we use throughout the material
life cycle, and assures we have sufficient resources to meet today’s needs and those of the
future.
Sustainability
Meeting the needs of the present without compromising the ability of future generations to
meet their own needs.
Toxic Chemicals
Any substance which may be harmful to the environment or hazardous to human health if
inhaled, ingested, or absorbed through the skin.
TSCA / Toxic Substances Control Act
The Toxic Substances Control Act of 1976 provides EPA with the authority to require reporting,
recordkeeping and testing requirements, and restrictions relating to chemical substances
and/or mixtures. TSCA addresses the production, importation, use, and disposal of specific
chemicals. Certain substances are generally excluded from TSCA, including food, drugs,
cosmetics, and pesticides.
TSD / Treatment, Storage, or Disposal facility
A facility that has authorization from Ecology to conduct dangerous waste management
treatment, storage, or disposal activities.
Underserved
Communities or areas that receive limited solid or hazardous waste services. This often includes
rural areas, multifamily housing, small businesses, public spaces, as well as communities of
color, low-income populations, and places with other environmental justice considerations.
WTE / Waste-to-Energy
Energy recovery from waste is the conversion of waste materials into useable heat, electricity,
or fuel through a variety of processes, including combustion, as well as gasification, pyrolysis,
and anaerobic digestion.
WRRED / Waste Reduction and Recycling Education Grants
Ecology grants that provide funding to local governments and non-profit organizations for local
or statewide education programs about litter control, waste reduction, recycling and
composting.
Publication 21-04-040 State Solid and Hazardous Waste Plan Second Draft
Page 87 August 2021
Waste Management Hierarchy
Priority methods for managing solid and hazardous waste established in Chapters 70A.205
RCW 235 (solid waste) and 70A.300 RCW 236 (hazardous waste). While the hierarchy differs
slightly between the two laws, both place reducing waste as the highest priority, followed by
recycling, and safe disposal.
Waste Prevention
To reduce the amount of solid waste generated or resources used, without increasing toxicity,
in the design, manufacture, purchase, or use of products or packaging. “Pure” waste prevention
does not include recycling or composting. Often used similarly to source reduction and waste
reduction.
Waste Reduction
Reducing the amount or toxicity of waste generated or reusing materials. Often used similarly
to source reduction and waste prevention.
235 https://app.leg.wa.gov/rcw/default.aspx?cite=70A.205
236 https://app.leg.wa.gov/RCW/default.aspx?cite=70.105